Selective removal of metallic single-walled carbon nanotubes in full length by organic film-assisted electrical breakdown.

نویسندگان

  • Keigo Otsuka
  • Taiki Inoue
  • Shohei Chiashi
  • Shigeo Maruyama
چکیده

An organic film-assisted electrical breakdown technique is proposed to selectively remove metallic (m-) single-walled carbon nanotubes (SWNTs) in full length towards creation of pure semiconducting SWNT arrays which are available for the large-scale fabrication of field effect transistors (FETs). The electrical breakdown of horizontally aligned SWNT arrays embedded in organic films resulted in a maximum removal length of 16.4 μm. The removal of SWNTs was confirmed using scanning electron microscopy and Raman mapping measurements. The on/off ratios of FETs were improved up to ca. 10,000, similar to that achieved for in-air breakdown. The experimental results suggest that exothermic oxidation of organic films induces propagation of oxidation reaction, hence the long-length removal of m-SWNTs.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Removal of Metallic Single-Walled Carbon Nanotubes Using Molecular Glass Thin Films

1. INTRODUCTION Single-walled carbon nanotubes (SWNTs) are a promising material for next generation field-effect transistors (FETs) [1]. It is one of the most important requirements to obtain purely semiconducting SWNT arrays. Recently, Jin et al. [2] have reported a method to selectively remove metallic SWNTs over the whole length by using thermocapillary flows of organic thin films. Here, we ...

متن کامل

The selective removal of metallic carbon nanotubes from As-grown arrays on insulating substrates

We present a method of selectively removing metallic single-walled carbon nanotubes (SWCNTs) from as-grown arrays on quartz substrates. The process utilizes an external silicon piece as a temporary global top gate to increase the resistance of the semiconducting SWCNTs while current is passed through the metallic SWCNTs, causing electrical breakdown through joule heating. The resulting SWCNT fi...

متن کامل

Electrical and Sensing Properties of Single-Walled Carbon Nanotubes Network: Effect of Alignment and Selective Breakdown

The electrical transport and NH3 sensing properties of randomly oriented and aligned SWNT networks were presented and discussed. The results indicate that aligned SWNT-FETs have better FET characteristics due to the reduced number of interconnected nodes. This was particularly true as the resistance of the devices increased. Gated electrical breakdown was implemented to selectively remove metal...

متن کامل

Gate-Free Electrical Breakdown of Metallic Pathways in Single-Walled Carbon Nanotube Crossbar Networks.

Aligned single-walled carbon nanotubes (SWNTs) synthesized by the chemical vapor deposition (CVD) method have exceptional potential for next-generation nanoelectronics. However, the coexistence of semiconducting (s-) and metallic (m-) SWNTs remains a considerable challenge since the latter causes significant degradation in device performance. Here we demonstrate a facile and effective approach ...

متن کامل

Thermal analysis for laser selective removal of metallic single-walled carbon nanotubes

Articles you may be interested in Electrical and thermal transport in metallic single-wall carbon nanotubes on insulating substrates Stability of ion implanted single-walled carbon nanotubes: Thermogravimetric and Raman analysis Chirality selection of single-walled carbon nanotubes by laser resonance chirality selection method Appl. Large diameter single-wall carbon nanotubes obtained by pulsed...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Nanoscale

دوره 6 15  شماره 

صفحات  -

تاریخ انتشار 2014