Heat Conduction in Multiply Adjoined Anisotropic Media with Embedded Point Heat Sources
نویسندگان
چکیده
In this article the direct domain-mapping technique is applied in the boundary element method (BEM) to investigate the heat conduction in composites consisting of multiple anisotropic media with embedded point heat sources. By use of a linear coordinate transformation, the physical domain is mapped to an auxiliary plane for 2D or space for 3D, where the heat conduction is considered isotropic. However, the interfaces of adjoined materials with dissimilar properties will overlap or separate in the mapped plane or space. For the use of the subregioning technique in BEM to solve such problems, the thermal equilibrium condition for interfaces is developed to account for boundary distortions. In the mapped plane or space, not only the locations but also the strength of heat sources are transformed accordingly. After the problem is solved in the mapped plane or space, the obtained numerical solution is thereafter interpolated and transformed back to the one in the physical domain. DOI: 10.1115/1.2137765
منابع مشابه
Boundary Element Analysis of Nonlinear Heat Conduction Problem with Point, Line and Distributed Heat Sources Employing Analytical integrations
متن کامل
Boundary Element Analysis of Nonlinear Heat Conduction Problem with Point, Line and Distributed Heat Sources Employing Analytical integrations
متن کامل
Investigation of Natural Convection in a Vertical Cavity Filled with a Anisotropic Porous Media
In present paper, a numerical analysis for a rectangular cavity filled with a anisotropic porous media has been studied. It is assumed that the horizontal walls are adiabatic and impermeable, while the side walls of the cavity are maintained at constant temperatures and concentrations. The buoyancy force that induced the fluid motion are assumed to be cooperative. In the two extreme cases o...
متن کاملMeshless analysis of casting process considering non-Fourier heat transfer
Casting is considered as a major manufacturing process. Thermal analysis of a solidifying medium is of great importance for appropriate design of casting processes. The conventional governing equation of a solidifying medium is based on the Fourier heat conduction law, which does not account for the phase-lag between the heat flux and the temperature gradient. In this paper, the concept of phas...
متن کاملConjugate Heat Transfer of MHD non-Darcy Mixed Convection Flow of a Nanofluid over a Vertical Slender Hollow Cylinder Embedded in Porous Media
In this paper, conjugate heat transfer of magneto hydrodynamic mixed convection of nanofluid about a vertical slender hollow cylinder embedded in a porous medium with high porosity have been numerically studied. The Forchheimer’s modification of Darcy’s law was used in representing the nanofluid motion inside the porous media. The governing boundary layer equations were transformed to non-dimen...
متن کامل