The SAM Model for Wear Inhibitor Performance of Dithiophosphates on Iron Oxide
نویسندگان
چکیده
Shaoyi Jiang,† Rawls Frazier,‡ Elaine S. Yamaguchi,§ Mario Blanco,† Siddharth Dasgupta,† Yanhua Zhou,† Tahir Cagin,† Yongchun Tang,| and William A. Goddard, III*,† Materials and Process Simulation Center, Beckman Institute (139-74), DiVision of Chemistry and Chemical Engineering, California Institute of Technology, Pasadena, California 91125, CheVron Research and Technology Company, 100 CheVron Way, Richmond, California 94802, CheVron Chemical Company, Oronite Technology Group, 100 CheVron Way, Richmond, California 94802, and CheVron Petroleum Technology Company, 1300 Beach BouleVard, La Habra, California 90631
منابع مشابه
Application of the Self-Assembled Monolayer (SAM) Model to Dithiophosphate and Dithiocarbamate Engine Wear Inhibitors
In previous studies of dithiophosphate [DTP ) S2P(OR)2] wear inhibitors bound to an oxidized iron surface, we found that the cohesive energy of the self-assembled monolayers (SAM) for DTP molecules with various organic R groups correlates with the wear inhibition observed in full engine experiments. In this paper we expand these calculations to consider dynamics at 500 K and then use the SAM mo...
متن کاملDelamination Wear Mechanism in Gray Cast Irons
An investigation of the friction and sliding wear of gray cast iron against chromium plated cast irons was carried out on a newly constructed reciprocating friction and wear tester. The tests were the first to be done on the test rig under dry conditions and at the speed of 170 cm/min, and variable loads of 20-260 N for a duration of 15 min. to 3 hours. The gray cast iron surfaces worn by a pro...
متن کاملCutting Forces and Tool Wear Investigation for Face Milling of Bimetallic Composite Parts Made of Aluminum and Cast Iron Alloys
Bimetallic parts are used in many industries for weight and cost reduction of workpieces working under high loads and wear. One application for this type of composite material is in automotive industry. In this work the tool wear and cutting forces in the face milling of bimetallic parts made of aluminum and cast iron were investigated. A356 and GG25 alloys that are common materials for bimetal...
متن کاملCombining fuzzy RES with GA for predicting wear performance of circular diamond saw in hard rock cutting process
Predicting the wear performance of circular diamond saw in the process of sawing hard dimensional stone is an important step in reducing production costs in the stone sawing industry. In the present research work, the effective parameters on circular diamond saw wear are defined, and then the weight of each parameter is determined through adopting a fuzzy rock engineering system (Fuzzy RES) bas...
متن کاملEffects of synthesized iron oxide nanoparticles from Ziziphora clinopodioides on expression of the efflux pump genes of Staphylococcus aureus
Introduction: One of the important factors causing nosocomial infections is drug-resistant Staphylococcus aureus strain, so correspondingly, having norA efflux pump is one of the bacterial's ability to generate drug resistance. Iron has been used as a nanoparticle with antimicrobial activity against bacteria. The aim of this study was to investigate the effect of iron oxide nanoparticles synthe...
متن کامل