Multiobjective Design Optimization of Merging Configuration for an Exhaust Manifold of a Car Engine
نویسندگان
چکیده
Multiobjective design optimization system of exhaust manifold shapes for a car engine has been developed using Divided Range Multiobjective Genetic Algorithm (DRMOGA) to obtain more engine power as well as to achieve less environmental impact. The three-dimensional manifold shapes are evaluated by the unstructured, unsteady Euler code coupled with the empirical engine cycle simulation code. This automated design system using DRMOGA was confirmed to find Pareto solutions for the highly nonlinear problems.
منابع مشابه
Thermo-mechanical high-cycle fatigue analysis of exhaust manifold of turbocharged engine with two-way coupling FSI
NNowadays, car manufactures in order to increasing torque and power with consider to fuel consumption, have swept to production of turbocharged engines. With consider to exhaust gas-temperature rises in boosted engines, recognition of critical locations of exhaust manifold in the worse condition of engine (full load and maximum speed), to prevent fracture of exhaust manifold is very important. ...
متن کاملIntegration of exhaust manifold with engine cylinder head towards size and weight reduction
In this research, a new exhaust manifold and its cooling jackets is first designed for the integrated exhaust manifold into cylinder head (IEMCH) for a turbocharged engine. Then, the gas exchange and flow analysis is carried out numerically to evaluate the proper conditions for the exhaust gas and the coolant stream respectively. Finally, the entire engine parts are thermally analyzed to assure...
متن کاملOptimization of Exhaust System Hangers for Reduction of Vehicle Cabin Vibrations
Excitations from the vehicle engine and the road surface cause vibrations in the exhaust system and the exhaust noise and vibrations are transmitted through the vehcile body and structure to the cabin, causing distractions and discomfort for the driver and passengers. In this article the method of average driving degrees of freedom displacement (ADDOFD) has been used to determine and optimize t...
متن کاملExperimental and finite element vibrational analysis of exhaust manifold heat shield
Most of internal combustion engines have one or two heat shields that have been installed on the exhaust manifold to avoid the heat transfer to upper parts of the engine such as the valve cover. In some engines, this part fails due to the fracture and causes engine noise and other failures in the engine. In this paper, the failure of a heat shield due to vibrational loads of the engine has been...
متن کاملAn Investigate on Power, Torque and Exhaust Gas Emission Variation: Effect of Hydroxy Gas Addition to Inlet Air of a SI Engine
Hydrogen has been known as a clean and suitable fuel to replace conventional fossil fuels. One of the common hydrogen production methods is using water electrolysis process. This method produces oxygen as well as hydrogen by ratio of 1:2. The aim of this work is to investigate the effects of inlet air enrichment by adding produced hydrogen and oxygen to an internal combustion engine. For this p...
متن کامل