Supercooled micro flows and application for asymmetric synthesis.
نویسندگان
چکیده
Supercooled micro flow in microchannels was demonstrated. In order to clarify fundamental properties of the supercooling state in microchannels, freezing temperature was measured in the microchannels having widths ranging from 70 microm to 300 microm. The freezing temperature decreased with decreasing width of the microchannel when the microchannel wall was chemically modified with octadecylsilane group. The lowest freezing temperature was observed as -28 degrees C for water in the 70 microm wide microchannel. By contrast, the freezing temperature was -15 degrees C and did not depend on width when a microchannel with a bare glass surface was used. Next, the freezing point was measured with flow rates ranging from 0.1 to 2.0 microl min(-1) and no dependence on flow rate was observed. Then, the supercooled micro flow was applied to an asymmetric reaction in micro two-phase flow of aqueous and CH2Cl2 phases. As expected from thermodynamic prediction, enantiomeric selectivity increased in the supercooled state of water.
منابع مشابه
Synthesis, Characterization and Application of Zinc Oxide with Micro Polyhedral and Nano Plate Morphologies for Simultaneous Decolorization of Two- dye Mixture in Wastewater
In this work, growth and assembly of the micro polyhedral zinc oxide was performed using airbubble assisted Triton X100, as a templating agent. In absence of air bubbling in the reactionsystem the nano plate zinc oxide was synthesized. The prepared samples were characterized by Xraydiffraction (XRD), field emission scanning electron microscopy (FE-SEM) and UV-Visspectrop...
متن کاملSize-Dependent Green’s Function for Bending of Circular Micro Plates Under Eccentric Load
In this paper, a Green’s function is developed for bending analysis of micro plates under an asymmetric load. In order to consider the length scale effect, the modified couple stress theory is used. This theory can accurately predict the behavior of micro structures. A thin micro plate is considered and therefore the classical plate theory is utilized. The size dependent governing equilibrium e...
متن کاملکاربرد و مقایسه روش های بولتزمن شبکه ای مختلف با شبکه بندی غیریکنواخت در شبیه سازی جریان در داخل میکروحفره و میکروکانال
In this study, for the first time, a comparison of single-relaxation-time, multi-relaxation-time and entropic lattice Boltzmann methods on non-uniform meshes is performed and application of these methods for simulation of two-dimensional cavity flows, channel flows and channel flows with sudden expansion is studied in the slip and near transition regimes. In this work, Taylor series expansion a...
متن کاملSimulation of Micro-Channel and Micro-Orifice Flow Using Lattice Boltzmann Method with Langmuir Slip Model
Because of its kinetic nature and computational advantages, the Lattice Boltzmann method (LBM) has been well accepted as a useful tool to simulate micro-scale flows. The slip boundary model plays a crucial role in the accuracy of solutions for micro-channel flow simulations. The most used slip boundary condition is the Maxwell slip model. The results of Maxwell slip model are affected by the ac...
متن کاملAsymmetric Synthesis of New Diastereomerically Pure Spiro Oxindolopyrrolizidines and Oxindolopyrrolidines via Cycloaddition Reactions of Azomethine Ylides and Menthol-Drived Trans-Cinnamic
Chiral pyrrolidines and pyrrolizidines with spirooxindole ring systems are the central skeletons for numerous alkaloids and pharmacologically important compounds. Gelesmine, pseudotabersonine, formosanine, isoformosanine, morroniside and mitraphylline are some of the alkaloids containing spirooxindole ring systems. Derivatives of spirooxindole find very wide biological applications as anti micr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Lab on a chip
دوره 6 9 شماره
صفحات -
تاریخ انتشار 2006