High Frequency Signal Attenuation through Materials
نویسندگان
چکیده
Due to the growth of high-frequency signal usage in recent years, limiting the coverage of these signals in the common household environment has become an issue. The paper proposes a set of simulations and measurements aiming to determine the attenuation of the GSM and Wi-Fi signals as they pass through different types of construction materials. Using MATLAB Simulink© and experimental studies using different scenarios, it was concluded that a combination of materials may be used to restrict the area of influence of the Wi-Fi signal, without affecting the GSM signal.
منابع مشابه
Application of Single-Frequency Time-Space Filtering Technique for Seismic Ground Roll and Random Noise Attenuation
Time-frequency filtering is an acceptable technique for attenuating noise in 2-D (time-space) and 3-D (time-space-space) reflection seismic data. The common approach for this purpose is transforming each seismic signal from 1-D time domain to a 2-D time-frequency domain and then denoising the signal by a designed filter and finally transforming back the filtered signal to original time domain. ...
متن کاملSeismic attenuation tomography using the frequency shift method
We present a method for estimating seismic attenuation based on frequency shift data. In most natural materials, seismic attenuation increases with frequency. The high-frequency components of the seismic signal are attenuated more rapidly than the low-frequency components as waves propagate. As a result, the centroid of the signal’s spectrum experiences a downshift during propagation. Under the...
متن کاملThe Effect of Dynamic Permeability on Velocity and Intrinsic Attenuation of Compressional Waves in Sand
Stress waves contain useful information about the properties of porous materials; they can be recovered through different non-destructive testing methods such as crosswell, vertical seismic profile, borehole logging as well as sonic tests. In all these methods, it is crucial to assess the effects of frequency on wave attributes including velocity and intrinsic attenuation. The dependency of per...
متن کاملFrequency-Dependent Attenuation Analysis of Ground-Penetrating Radar Data
I investigate the frequency dependence of attenuation and problems with measuring the intrinsic attenuation in reflection data. It is well established that in many materials attenuation is approximately linear with frequency over the bandwidth of the GPR signal, with a slope characterized by a constant Q* parameter. I show the relationship of Q* to the parameters describing Cole-Cole relaxation...
متن کاملRain Attenuation Prediction at Ku Band Using Satellite Signal Beacon Measurement in Iran
In this paper satellite wave propagation at Ku and Ka band is considered. The design and simulation of a typical satellite beacon receiver at Ka band is designed and simulated for the future works. Also rain attenuation prediction at Ku band using satellite signal beacon measurement and simulations for Iran Telecommunication Research Center (ITRC) are presented. The measurement setup consists o...
متن کامل