Nanoscaled Structures of Chlorate Producing Electrodes

SODIUM CHLORATE IS MAINLY USED for production of chlorine dioxide (a pulp bleaching agent). Sodium chlorate is produced by an electrochemical process where chloride ions (from sodium chloride dissolved in water) are oxidized to chlorine on the anodes and hydrogen is evolved on the cathodes. The anode of this process consists of a metal plate coated with a catalytically active metal oxide film. The electrocatalytic properties of the anode coating film have been widely investigated due to the great importance of these electrodes in the electrochemical industry. The material properties are, however, not as well investigated, and the studies described in this thesis are an attempt to remedy this. Several standard material characterization methods were used, such as SEM, TEM, AFM, EDX, XRD, porosimetry and DSC. Also, a novel model system based on spin coated electrode films on smooth substrates was developed. The model system provided a way to design samples suitable for e.g. TEM, where the sample thickness is limited to maximum of 100 nm. This is possible due to the ability to control the film thickness by the spinning velocity when using the spin coating technique. It was shown here that the anode coating has a nanostructure. It consists of grains, a few tens of nanometers across. The nanostructure leads to a large effective area and thus provides an explanation of the supe-