Integration of polymer and metal microstructures using liquid-phase photopolymerization
نویسندگان
چکیده
In this paper we demonstrate, using a fabrication technique, liquid-phase photopolymerization (LP3) for the relatively fast and low-cost integration of thick polymers and electroformed metal microstructures to develop a range of microfluidic components and systems. Liquid-phase UV-photosensitive polymers, similar to negative-tone photoresists, are used to create both polymer microstructures and molds to define electroformed metal (here, nickel—Ni) microstructures. This fabrication process can act as a stand-alone or appended one; it is gentle to allow processing after a metal structure has been released since fabrication occurs only at designated areas on a substrate, i.e. no spinning/casting of photosensitive materials, and self-planarization is achieved since photopolymerization of polymers occurs in the liquid phase. Photopatterned polymer and electroformed Ni microstructures are fabricated using LP3 with a low-end (low-cost) lithographic system. A variety of functional microfluidic components and systems, e.g., an active and a passive chaotic micromixer, and gear trains, are fabricated by utilizing a sequential step-and-repeat LP3 process to demonstrate the integration of polymers and metals. (Some figures in this article are in colour only in the electronic version)
منابع مشابه
Theory and computation of photopolymerization-induced phase transition and morphology development in blends of crystalline polymer and photoreactive monomer.
A hypothetical phase diagram of a crystalline polymer/photoreactive monomer mixture has been calculated on the basis of phase field (PF) free energy of crystal solidification in conjunction with Flory-Huggins (FH) free energy of liquid-liquid demixing to guide the morphology development during photopolymerization of poly(ethylene oxide)/triacrylate blend. The self-consistent solution of the com...
متن کاملTransient liquid phase bonding of AISI 304L stainless steels with the austenitic and martensitic microstructures
In the present study, the effect of time and base metal microstructure on the Transient Liquid Phase (TLP) bonding of 304L stainless steel was studied. TLP was performed at 1050 0C for 5 and 60 minutes on the coarse grain austenitic and martensitic microstructure using BNi-2 interlayer. To prepare martensitic microstructure, as-received 304L was rolled at -15 0C up to 80% rolling reduction. TEM...
متن کاملv 1 [ co nd - m at . s of t ] 2 5 Se p 20 01 Effect of Director Distortions on Polymer - Liquid Crystal Phase Separation
We study photopolymerization in a low-molecular weight liquid crystal with non-uniform director gradients. Phase separation results in spatially nonuniform distribution of polymer density controlled by the distorted nematic matrix. Director-gradient-controlled polymerization provides a new and useful technique to assemble micron-scale polymer architectures. PACS number(s): 61.30.Gd, 64.75.+g Ty...
متن کاملTheoretical Investigation on Dynamics of Photopolymerization-Induced Phase Separation and Morphology Development in Nematic Liquid Crystal/Polymer Mixtures
متن کامل
Dielectrophoretic manipulation of the mixture of isotropic and nematic liquid
In various applications involving liquid crystals, the manipulation of the nanoscale molecular assembly and microscale director alignment is highly useful. Here we show that a nematic-isotropic mixture, a unique bi-liquid system, has potential for the fabrication of microstructures having an ordered phase within a disordered phase, or vice versa. The volume expansion and shrinkage, migration, s...
متن کامل