A study of surface roughening in fcc metals using direct numerical simulation
نویسندگان
چکیده
Grain-scale surface roughening due to plastic straining in polycrystalline aluminum is studied with the aid of a three-dimensional finite-element crystal-plasticity model. An improved understanding of the origin of surface roughening profiles in plastically strained aluminum is sought. Large-scale, Direct Numerical Simulation enables the computation of full-field solutions and the explicit consideration of the deformation of individual crystals as well as of their crystalline texture evolution and interaction with neighboring grains. Simulations are conducted on idealized flat sheet polycrystalline aluminum samples under uniaxial and biaxial loading conditions. The results obtained show that the ensuing surface profiles are controlled by several factors: applied boundary conditions, Taylor factor and shear tendency of the individual grains and the spatial distribution of grain neighborhood orientations. The conditions leading to different ridging profiles, e.g., corrugated and ribbed surface profiles, are discussed. 2004 Published by Elsevier Ltd on behalf of Acta Materialia Inc.
منابع مشابه
Evaluation of Recirculation Time in Bubble Train Flow by Using Direct Numerical Simulation
In this research, hydrodynamics of the Bubble Train Flows (BTF) in circular capillaries has been investigated by Direct Numerical Simulation (DNS).The Volume of Fluid Based (VOF) interface tracking method and streamwise direction periodic boundary conditions has been applied. The results show that there exists an appropriate agreement between DNS and experimental correlation results. The re...
متن کاملExperimental and Numerical Investigation of Laser Assisted PC to Polycarbonate Welding
Laser welding is a novel method for direct joining of metals and polymers, which leads to a mechanical and chemical bond between metal and polymer. In this study, feasibility of dissimilar joining between St12 and polycarbonate is studied theoretically. Then, the ND: YAG laser is implemented to join St12 and Polycarbonate. Empirical results indicate creation of a joint between St12 and polycarb...
متن کاملExperimental and Numerical Investigation of Laser Assisted PC to Polycarbonate Welding
Laser welding is a novel method for direct joining of metals and polymers, which leads to a mechanical and chemical bond between metal and polymer. In this study, feasibility of dissimilar joining between St12 and polycarbonate is studied theoretically. Then, the ND: YAG laser is implemented to join St12 and Polycarbonate. Empirical results indicate creation of a joint between St12 and polycarb...
متن کاملCalculation for Energy of (111) Surfaces of Palladium in Tight Binding Model
In this work calculation of energetics of transition metal surfaces is presented. The tight-binding model is employed in order to calculate the energetics. The tight-binding basis set is limited to d orbitals which are valid for elements at the end of transition metals series. In our analysis we concentrated on electronic effects at temperature T=0 K, this means that no entropic term will be pr...
متن کاملComparative evaluation of niobium surface preparation methods for electrodeposition
To find a suitable treatment in the preparation of Nb surface for platinum electrodeposition, different methods such as thermal oxidation, anodic oxidation, mechanical roughening, and mechanical roughening with subsequent anodic etching were examined. X-ray photoelectron spectroscopy was used to study the chemical composition of depth analysis of the surface. Moreover, in order to examine the m...
متن کامل