Design and analysis of a multicolor quantum well infrared photodetector

Public reporting burden for this collection of information is estimated to average 1 hour per response, including the time for reviewing instruction, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to Washington 11. SUPPLEMENTARY NOTES The views expressed in this thesis are those of the author and do not reflect the official policy or position of the Department of Defense or the U.S. Government. 12a. DISTRIBUTION / AVAILABILITY STATEMENT Approved for public release; distribution unlimited 12b. DISTRIBUTION CODE 13. ABSTRACT (maximum 200 words) Recent military applications have demanded photodetectors with high sensitivity, high selectivity and multispectral capability for detection and identification of the target. These characteristics have been found in quantum well infrared photodetectors (QWIP). Driven by these applications, a QWIP photodetector capable of detecting simultaneously infrared emissions within near infrared (NIR), mid wavelength infrared (MWIR) and long wavelength infrared (LWIR) was studied, modeled, designed and characterized. Using the envelope function approximation, the mathematical model of the quantum phenomena in semiconductor heterostructures was derived. A computational tool was developed to solve self-consistently the Schodinger-Poisson equation using the shooting method, allowing the theoretical evaluation of the absorption coefficient. A three-color (NIR, MWIR and LWIR) GaAs-based QWIP sample and a two-color (NIR and MWIR) InP-based QWIP sample were designed, both comprised of stacks of uncoupled wells for each band detection. The 67 layers of the GaAs sample was grown using molecular beam epitaxy (MBE). Intersubband absorption in the sample was measured for the MWIR and LWIR using Fourier transform spectroscopy (FTIR) and the measured peak positions, found at 5.3 µm , 8.7 µm , and 13.8 µm are within 0.3 µm of the theoretical values, indicating that the model accurately predicts the absorption wavelengths. A two-dimensional ordered grating pattern was selected and optimized separately for both MWIR and LWIR desired peaks. Finally the photodetector device configurations were designed to permit to the measurement of the NIR band through photocurrent spectroscopy and performance analysis. The fabrication and characterization of the prototypes are a matter for future work.