Perceived color shift of ceramics according to the change of illuminating light with spectroradiometer

نویسندگان

  • Hyun-Suk Cha
  • Bin Yu
  • Yong-Keun Lee
چکیده

PURPOSE Perceived color of ceramics changes by the spectral power distribution of ambient light. This study aimed to quantify the amount of shifts in color and color coordinates of clinically simulated seven all-ceramics due to the switch of three ambient light sources using a human vision simulating spectroradiometer. MATERIALS AND METHODS CIE color coordinates, such as L*, a* and b*,of ceramic specimens were measured under three light sources, which simulate the CIE standard illuminant D65 (daylight), A (incandescent lamp), and F9 (fluorescent lamp). Shifts in color and color coordinate by the switch of lights were determined. Influence of the switched light (D65 to A, or D65 to F9), shade of veneer ceramics (A2 or A3), and brand of ceramics on the shifts was analyzed by a three-way ANOVA. RESULTS Shifts in color and color coordinates were influenced by three factors (P<.05). Color shifts by the switch to A were in the range of 5.9 to 7.7 ΔE*ab units, and those by the switch to F9 were 7.7 to 10.2; all of which were unacceptable (ΔE*ab > 5.5). When switched to A, CIE a* increased (Δa*: 5.6 to 7.6), however, CIE b* increased (Δb*: 4.9 to 7.8) when switched to F9. CONCLUSION Clinically simulated ceramics demonstrated clinically unacceptable color shifts according to the switches in ambient lights based on spectroradiometric readings. Therefore, shade matching and compatibility evaluation should be performed considering ambient lighting conditions and should be done under most relevant lighting condition.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

The Effect of Different Solutions on Optical Behavior of Polished and Glazed Zirconia-Reinforced Lithium Silicate Ceramics

Background: This study sought to assess the effect of glazing and polishing surface treatments on the optical behavior of zirconia-reinforced lithium silicate ceramics thermocycled in different solutions. Methods:Computer-aided design/computer-aided manufacturing ceramics (VITA Suprinity) were cut into samples (n=104) measuring 1.5x14x10 mm according to t...

متن کامل

Color Stability of Two Bulk-Fill Composite Resins

Objective: Bulk-fill composites are a group of composite resins designed for easy and fast filling of large cavities. This study aimed to assess the color stability of bulk-fill composites subjected to xenon radiation and evaluate their color change (&DeltaE) following polymerization. Methods: In this in vitro experimental study, 30 specimens (4mm in height and 8mm in diameter) were fabricat...

متن کامل

Color Stability of a Microhybrid Resin Composite Polymerized with LED and QTH Light Curing Units

Introduction: Discoloration of resin composites is a common reason for replacement of these restorations. The aim of this study was to eva-luate the influence of different light curing de-vices on color stability of a microhybrid resin composite. &nbsp;Materials and Methods: 80 disc-shaped speci-mens (8 mm in diameter, 2-mm height) were fabricated from filtek Z250 resin composite. Specimens wer...

متن کامل

Effect of Accelerated Aging on Color Stability of Two Silica-Based Ceramics with Leucite and Lithium-Disilicate Crystalline Phases After Glazing and Polishing

Background and Aim: Color match between prosthetic restorations and natural teeth is challenging in dentistry. The aim of the current study was to assess the effect of accelerated aging on color stability of two silica-based ceramics with leucite and lithium disilicate crystalline phases after glazing and polishing surface treatments. Materials and Methods: In this experimental study, 30 disc-...

متن کامل

Assessing lighting and color Temperature In The Office Workplaces And Relationship To Visual Comfort

Background and aims: Lighting directly and indirectly affects employeeschr('39') mental health and their performance. Good lighting is required for good visibility of the environment and should provide a luminous environment that is human-friendly and appropriate for the visual task performed. Optimal lighting is one of the most important issues in providing the physical conditions of different...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 5  شماره 

صفحات  -

تاریخ انتشار 2013