A Novel Approach for Broadband Antenna Matching Network Design
نویسندگان
چکیده
In this paper, a novel method for interstage matching network design in the smith chart is presented. This technique is based on matching the reflection coefficients between input of interstage matching network and S22 of the first transistor with considering input VSWR and the gain of the complete amplifier (or output of the complete amplifier if the matching is applied to the output of the interstage matching network). Also, the novel locus of constant gain and VSWR of interstage matching network are presented in the smith chart.
منابع مشابه
Parametric analysis of a broadband Archimedean spiral antenna with cavity
In this article an Archimedean spiral antenna is designed and analyzed that has good operation in broadband application. By analyzing this design, the effects that different parameters have on antenna operation will be studied and ways of optimization will be found. Influences of cavity height and number of turns to obtain good matching and gain in a frequency interval of 4 to 18 GHz will be d...
متن کاملA Broadband Low Power CMOS LNA for 3.1–10.6 GHz UWB Receivers
A new approach for designing an ultra wideband (UWB) CMOS low noise amplifier (LNA) is presented. The aim of this design is to achieve a low noise figure, reasonable power gain and low power consumption in 3.1-10.6 GHz. Also, the figure of merit (FOM) is significantly improved at 180nm technology compared to the other state-of-the-art designs. Improved π-network and T-network are used to obt...
متن کاملCircularly Polarized Circular Slot Antenna Array Using Sequentially Rotated Feed Network
This paper presents the design, simulation, and measurement of two low-cost broadband circularly polarized (CP) printed antennas: a single element and an array at C band. The proposed single element antenna is excited by an L-shaped strip with a tapered end, located along the circular-slot diagonal line in the back plane. From the array experimental results, the 3 dB axial ratio bandwidth can r...
متن کاملBroadband Stacked Microstrip Patch Antenna for L-Band Operation: FDTD Modeling
This paper presents a novel implementation of an electromagnetically coupled patch antenna using air gap filled substrates to achieve the maximum bandwidth. We also propose an efficient modeling technique using the FDTD method which can substantially reduce the simulation cost for modeling the structure. The simulated results have been compared with measurement to show the broadband behavio...
متن کاملDesign and Implementation of a Compact Super-Wideband Printed Antipodal Antenna Using Fractal Elements
A compact printed fractal antipodal bow-tie antenna is designed and implemented to simultaneously cover the operations in the C, X, and Ku-bands. It is demonstrated that by addition of small fractal elements at the sides of hexagonal arms of the bow-tie, a wide operating frequency range of 3.3 to 19.1 GHz can be covered while antenna size is only 30×34×1.2 mm3. In order to match the antenna to ...
متن کامل