Comparison of Mathematical and Experimental Simulation of Lubrication Conditions in the System Of Piston, Piston Ring and Liner
نویسنده
چکیده
منابع مشابه
Influence of sliding surface roughness and oil temperature on piston ring pack operation of an automotive IC engine
In the paper a comprehensive model of a piston ring pack motion on an oil film has been presented. The local oil film thickness can be compared to height of the combined roughness of sliding surfaces of piston rings and cylinder liner. Equations describing the mixed lubrication problem based on the empirical mathematical model formulated in works of Patir, Cheng and Greenwood, Tripp have been c...
متن کاملAn Improved Lubrication Model between Piston Rings and Cylinder Liners with Consideration of Liner Dynamic Deformations
The friction pair of piston rings and cylinder liner is one of the most important friction couplings in an internal combustion engine. It influences engine efficiency and service life. Under the excitation of piston slaps, the dynamic deformation of cylinder liner is close to the surface roughness magnitudes, which can affect the friction and lubrication performance between the piston rings and...
متن کاملAPPLICATION OF THE SINGULAR BOUNDARY VALUE PROBLEM FOR INVESTIGATION OF PISTON DYNAMICS UNDER POLYTROPIC EXPANSION PROCESS
In this paper a mathematical simulation of a simplified internal combustion engine is presented. To contribute engine kinematics and its geometry, simple relations are derived for constrained motions. The equation of motion for the piston forms a singular boundary value problem. The uniqueness of the solution was studied in the Banach space. For solving governing equations an iterative numerica...
متن کاملComparison of Heavy-Duty Scuffing Behavior between Chromium-Based Ceramic Composite and Nickel-Chromium-Molybdenum-Coated Ring Sliding against Cast Iron Liner under Starvation
A running-in and starved lubrication experiment is designed to investigate the heavy-duty scuffing behavior of piston ring coatings against cast iron (Fe) cylinder liner using the piston ring reciprocating liner test rig. The scuffing resistance of the piston ring with the chromium-based ceramic composite coating (CKS), and that with the thermally sprayed nickel-chromium-molybdenum coating (NCM...
متن کاملInvestigating the effect of nanocoating on friction loss and abrasion in the piston rings
The piston ring which prepares mechanical sealing of a combustion chamber, should have significant abrasion resistance and less friction loss, using appropriate ring coating. The coating widely used is CrN, because of its good abrasion resistance at room temperature. However, it suffers from some shortcomings, such as high abrasion rate at temperatures above 200°C and lack of self-lubricating p...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2014