A study on the disk-shaped piezoelectric transformer with multiple outputs.
نویسندگان
چکیده
In this study, a modified disk-shaped multiple-output piezoelectric transformer operated at the fundamental radial vibration mode has been presented. A derived equivalent circuit for the multioutput piezoelectric transformer was used to analyze the performance. Two piezoelectric transformers, a symmetrically electroded piezoelectric transformer with dual outputs and an asymmetrically electroded piezoelectric transformer with triple outputs, were fabricated with lead zirconate titanate piezoelectric ceramics. The characteristics of the two piezoelectric transformers were investigated experimentally. The piezoelectric transformer with multiple outputs has potential to be used in power supply units and other electronic circuits.
منابع مشابه
A lead-free piezoelectric transformer in radial vibration modes.
In this study, a disk-shaped piezoelectric transformer was fabricated using lead-free (K,Na)NbO(3)-based ceramics with high mechanical quality factor. The transformer can operate in the fundamental or the third radial vibration mode. The transformer is poled along the thickness direction. The top surface is covered by ring/dot silver electrodes separated by an annular gap which serve as the inp...
متن کاملInfluence of the Parameters of Disk Winding on the Impulse Voltage Distribution in Power Transformers
Overvoltage distribution along the transformer winding must be uniform to certify the safety of the operation of the power transformer. Influence of the parameters variation on the impulse voltage distribution (IVD) in disk winding transformer is going to be analyzed which hasn’t been analyzed on this type of winding in the previous papers. In this research, a transformer with disk winding and ...
متن کاملAn Investigation into Resonant Frequency of Triangular V-Shaped Cantilever Piezoelectric Vibration Energy Harvester
Power supply is a bottle-neck problem of wireless micro-sensors, especially where the replacement of batteries is impossible or inconvenient. Now piezoelectric material is being used to harvest vibration energy for self-powered sensors. However, the geometry of a piezoelectric cantilever beam will greatly affect its vibration energy harvesting ability. This paper deduces a remarkably precise an...
متن کاملDevelopment of a 3-D Finite-element Solver for Piezoelectric Transformer Analysis
In this work, we develop a 3-D finite-element-method (FEM) solver, NTUPZE, for piezoelectric transformer (PT) analyses. The solver employs the 8-node brick element, and applies the harmonic analysis to study the voltage gains and the phase difference at different frequencies for PTs. Using the NTUPZE, we analyze two different types of piezoelectric transformers: the modal-type and the unipoled-...
متن کاملResonant frequency of bimorph triangular V-shaped piezoelectric cantilever energy harvester
The concept of “energy harvesting” is to design smart systems to capture the ambient energy and to convert it to usable electrical power for supplying small electronics devices and sensors. The goal is to develop autonomous and self-powered devices that do not need any replacement of traditional electrochemical batteries. Now piezoelectric cantilever structures are being used to harvest vibrati...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- The Review of scientific instruments
دوره 78 12 شماره
صفحات -
تاریخ انتشار 2007