Endurance of Damping Properties of Foam-Filled Tubes
نویسندگان
چکیده
The favorable energy-absorption properties of metal foams have been frequently proposed for damping or anti-crash applications. The aim of this paper is to investigate the endurance of these properties for composite structures, made by a metal or a hybrid metal-polymeric foam used as the core filling of a tubular metal case. The results of experimental tests are shown, run with two types of structures: 1) square steel tubes filled with aluminum or with hybrid aluminum-polymer foams; 2) round titanium tubes filled with aluminum foams. The paper shows that the damping properties of a foam-filled tube change (improve) with the number of cycles, while all other dynamic properties are nearly constant. This result is very important for several potential applications where damping is crucial, e.g., for machine tools.
منابع مشابه
Parametric Study of the Empty and Foam-Filled End-Capped Conical Tubes under quasi Static and Dynamic impact Loads
This paper investigates the parametric study of the empty and foam-filled end-capped tubes under quasi static and dynamic loadings. The numerical crash analysis of the empty and foam-filled tubes was performed using the explicit finite element code ABAQUS- explicit. Satisfactory agreements were generally achieved between the numerical and experimental results. In order to determine the crash be...
متن کاملThe Effect of Fe Additive on Plastic Deformation for Crush-Boxes with Closed-Cell Metal Foams, Part II: Al-Composite Foam-Filled brass tubes Compression Response
The brass tubes with foam cores of AlSi7SiC3, AlSi7SiC3Fe1 and AlSi7SiC3Fe3 were produced as the crush-boxes with circle and square cross-section. Then axial compressive behavior and energy absorption capability of the foam-filled tubes were investigated during the quasi-static progressive plastic buckling. The uniaxial compressive stress–strain curves of the foam-filled brass tubes exhibited t...
متن کاملNumerical Crashworthiness Analysis of Graded Layered Foam- Filled Tubes Under Axial Loading
In this article, the results of a study on energy absorption characteristics of foam-filled thin-walled structures with finite element analysis have been presented. Four specimens of thin walled structures have been filled with uniform foam and three specimens have been filled with linear four-layered foam. Also, eight layers HLH (High-Low-High) and eight layers LHL (Low-High-Low) have been sim...
متن کاملExperimental and Numerical Simulation Investigation on Crushing Response of Foam-Filled Conical Tubes Stiffened with Annular Rings
In this paper, crashworthiness characteristics of conical steel tubes stiffened by annular rings and rigid polyurethane foam are investigated. For this purpose, wide circumferential rings are created from the outer surface of the conical tube at some determined areas along tube length. In fact, this method divides a long conical tube into several tubes of shorter length. When this structure is ...
متن کاملCrushing Analysis of Empty and Foam-Filled Cylindrical and Conical Corrugated Composite Tubes
In the present article, a numerical study is performed to investigate the crushing behavior of cylindrical and conical corrugated composite tubes. Different aluminum foams are applied to the proposed structures in order to offer an excellent energy absorption capacity. The crushing behavior of tubes are evaluated in terms of two parameters: SEA (specific energy absorption) and CFE (crush force ...
متن کامل