Facilitation of bacterial transport through porous media by changes in solution and surface properties
نویسندگان
چکیده
Facilitation of bacterial transport for the purpose of bioaugmentation of contaminant degradation may be achieved by a number of methods typically involving changes in the properties of the groundwater or changes in the characteristics of the bacterial surface. Facilitated bacterial transport was investigated in laboratory experiments monitoring bacterial retention in quartz sand and glass bead mini-columns. Bacterial attachment etl~ciencies were estimated from bacterial retention using a steady-state filtration equation. Decreased ionic strength resulted in decreased retention of A. paradoxus, with roughly order-of-magnitude decreases in retention accompanying order-of-magnitude decreases in ionic strength. Seven test chemicals were also examined in terms of their ability to modify bacterial surface properties and enhance bacterial transport. Of the seven test chemicals, the surfactants resulted in the most dramatic decreases in bacterial retention. The attachment efticiency of A. paradoxus on glass beads was lowered from 0.38 in the absence of Tween-20 to 0.0016 in the presence of 0.1 vol.~:~ Tween-20, and from 0.064 in the absence of sodium dodecyl sulfate (SDS) to 0.0067 in the presence of 10 mg 1 ~ SDS. Cell-surface modifying chemicals such as proteinase-k, EDTA, and pyrophosphate reduced bacterial attachment elticiencies. However, the reductions were less than an order of magnitude, even at the highest concentrations used. Bacterial attachment efficiencies were reduced from 0.055 in the absence of proteinase-k to 0.044 in the presence of 0.1 mg 1 ~ proteinase-k, 0.61 in the absence of EDTA to 0.34 in the presence of 0.001 M EDTA, and 0.27 in the absence of pyrophosphate to 0.11 in the presence of 0.01 M pyrophosphate. Increased bacterial attachment etticiencies were observed for A. paradoxus on glass beads in the presence of 0.1 mg 1 -~ lysozyme (0.74~ vs. the absence of lysozyme (0.0048), and in the presence of 0.01 M periodate (0.10~ vs. the absence of periodate (0.052i. Changes in porous media surface characteristics were also examined. Retention of Savannah River strain A1264 on quartz sand media was observed to be less than half that on iron oxide coated quartz sand media. Coating of iron oxide quartz by sorbed humic acids resulted in a 44% decrease in bacterial retention, a value slightly greater than that on quartz porous media. In addition to the presence of sediment organic matter, the presence of dissolved organic matter ( DOM 1 altered bacterial retention on the porous media. DOM decreased bacterial retention on quartz ( ~ 20%), and increased bacterial retention on iron oxid~quartz (~ 10%).
منابع مشابه
A “v2-f Based” Macroscopic K-Ε Model for Turbulent Flow through Porous Media
In this paper a new macroscopic k-ε model is developed and validated for turbulent flow through porous media for a wide range of porosities. The morphology of porous media is simulated by a periodic array of square cylinders. In the first step, calculations based on microscopic v2 − f model are conducted using a Galerkin/Least-Squares finite element formulation, employing equalorder bilinear ve...
متن کاملMultiple Solutions for Slip Effects on Dissipative Magneto-Nanofluid Transport Phenomena in Porous Media: Stability Analysis
In the present paper, a numerical investigation of transport phenomena is considered in electrically-conducting nanofluid flow within a porous bed utilizing Buongiorno’s transport model and Runge-Kutta-Fehlberg fourth-fifth order method. Induced flow by non-isothermal stretching/shrinking sheet along with magnetic field impact, dissipation effect, and slip conditions at the surface are...
متن کاملPreparation of porous porous bodies by gelcasting method and the analysis of its properties using the response surface method to remove methylene blue from aqueous solution
Zeolite were formed through agar gelcasting method.Response surface methodology ( RSM ) is proposed as a tool for rapidly optimizing the activation parameters in order to obtain the highest porosity of samples. 40 % of zeolite and 1 wt % of agar was selected as optimal conditions. porous bodies with an optimal combination of 54.4% porosity , density 0.9 g / cm3 , and compressive strength of 6....
متن کاملTwo-Dimensional Solute Transport with Exponential Initial Concentration Distribution and Varying Flow Velocity
The transport mechanism of contaminated groundwater has been a problematic issue for many decades, mainly due to the bad impact of the contaminants on the quality of the groundwater system. In this paper, the exact solution of two-dimensional advection-dispersion equation (ADE) is derived for a semi-infinite porous media with spatially dependent initial and uniform/flux boundary conditions. The...
متن کاملTwo-Dimensional Solute Transport with Exponential Initial Concentration Distribution and Varying Flow Velocity
The transport mechanism of contaminated groundwater has been a problematic issue for many decades, mainly due to the bad impact of the contaminants on the quality of the groundwater system. In this paper, the exact solution of two-dimensional advection-dispersion equation (ADE) is derived for a semi-infinite porous media with spatially dependent initial and uniform/flux boundary conditions. The...
متن کامل