Fatigue Failure of Noncemented Porous-coated Implants
نویسندگان
چکیده
The causes of mechanical failure of five noncemented porous-coated components were studied. There were two cobalt-chromium alloy and three titanium alloy implants which fractured after 12 to 48 months. The implants included one acetabular component, and one femoral condylar, one patellar and two tibial components. Examination of the fractured surfaces revealed fatigue to be the mechanism of failure in all cases. The porous coating and the processes required for its fabrication had resulted in weakening and reduction of substrate thickness. Additional factors were stress concentration due to limited, localised bone ingrowth, and some features of the design of the implants.
منابع مشابه
Debonding of the acetabular porous coating in hip resurfacing arthroplasty. A case report.
This report presents the case of a patient in whom hip resurfacing arthroplasty failed because of loosening of the acetabular shell secondary to debonding of the surface coating. During normal function, there will inevitably be cyclic shear stress between the coating and the surrounding bone. This might result in fatigue failure of the bond. In spite of increasing numbers of porous coated aceta...
متن کاملClinical and roentgenographic evaluation of noncemented porous-coated anatomic medullary locking (AML) and porous-coated anatomic (PCA) total hip arthroplasties.
Eighty-four primary noncemented porous-coated total hip arthroplasties (THAs) in 78 patients were reviewed clinically and roentgenographically at an average follow-up period of 37 months. The average patient age was 51.9 years. Sixty-four Anatomic Medullary Locking (AML) devices were placed in 58 patients, and 20 Porous-Coated Anatomic (PCA) devices were placed in 20 patients. The AML devices h...
متن کاملBone density study of the proximal femur after hip arthroplasty with porous-coated implants
Progressive loss of bone mineral density around the femora! component of total hip replacement continues to pose a threat to long term prosthetic survival. A linear study was undertaken to measure bone mineral density on a monthly basis following total hip arthroplasty in 11 male patients. The opposite femur was used as the control measurement. Bone mineral density was unchanged at two mo...
متن کاملEffect of Coating Materials on the Fatigue Behavior of Hip Implants: A Three-dimensional Finite Element Analysis
This study aims to validate, using finite element analysis (FEA), the design concept by comparing the fatigue behavior of hip implant stems coated with composite (carbon/PEEK) and polymeric (PEEK) coating materials corresponding to different human activities: standing up, normal walking and climbing stairs under dynamic loadings to find out which of all these models have a better performance in...
متن کاملDistal fixation of proximally coated tapered stems may predispose to a failure of osteointegration.
Despite excellent long-term results of proximally coated tapered wedge femoral stems in noncemented total hip arthroplasty, we have consistently observed a minority fail to achieve osteointegration. We retrospectively reviewed 320 consecutive total hip arthroplasties performed by a single surgeon using a single stem over a 4-year period. Clinical and radiographic parameters were analyzed for ri...
متن کامل