New Balanced-Input Integrated Circuit Achieves Very High Dynamic Range In Real- World Systems
نویسندگان
چکیده
Limited Common-Mode Rejection Ratio (CMRR) in balanced interfaces often limits dynamic range in real-world audio systems. Conventional differential amplifier input circuits suffer serious CMRR degradation when driven by real system signal sources instead of laboratory generators. An ideal audio transformer, because of its extremely high common-mode impedances, is virtually immune to this degradation. A new Integrated Circuit (IC) is described that uses a patented topology to achieve common-mode impedances comparable to those of an ideal transformer. As a result, the IC enables signals with very high dynamic range to be transported without contamination by system ground-voltage differences or other sources of common-mode interference. Other features of the IC, which relate to audio signal quality, are also detailed.
منابع مشابه
Class-AB Square-Root Domain Filters Based on the Floating
In this paper a new approach for design of class-AB current-mode square-root domain filters based on the electronically simulated translinear loop principle is presented. FG-MOS transistors that operate in strong inverted saturation region are employed for implementation of translinear loop circuit. The filter achieves immunity to body effect, low circuit complexity, large input dynamic ran...
متن کاملA New Balanced Audio Input Circuit for Maximum Common-mode Rejection in Real-world Environments
A new patented balanced input circuit emulates the extremely high common-mode input impedances which give a quality audio transformer its hum and buzz rejecting advantage in real-world audio systems, where driving source impedances are rarely perfectly balanced. Compared to traditional "active balanced" circuits, the new circuit can produce CMRR improvements up to 80 dB but is only slightly mor...
متن کاملA novel high gain, high bandwidth CMOS differential front-end for wireless optical systems
This paper describes a high performance CMOS differential input front-end, designed for optical wireless communications. The front-end achieves a 50 MHz bandwidth and a 400 KΩ transimpedance gain (20 THzΩ gain-bandwidth product) with the targeted input photodiode junction capacitance of 10 pF. The input dynamic range is 60 dB, obtained through a switched step gain approach, and the input referr...
متن کاملDesign of robust carrier tracking systems in high dynamic and high noise conditions, with emphasis on neuro-fuzzy controller
The robust carrier tracking is defined as the ability of a receiver to determine the phase and frequency of the input carrier signal in unusual conditions such as signal loss, input signal fading, high receiver dynamic, or other destructive effects of propagation. An implementation of tight tracking can be understood in terms of adopting a very narrow loop bandwidth that contradict with the req...
متن کاملLow-Power Low-Noise CTIA Readout Integrated Circuit Design for Thermal Imaging Applications
This paper targets the design of a high dynamic range lowpower, low-noise pixel readout integrated circuit (ROIC) that handles the infrared (IR) detector’s output signal of the uncooled thermal IR camera. Throughout the paper, both the optics and the IR detector modules of the IR camera are modeled using the analogue hardware description language (AHDL) to enable extracting the proper input sig...
متن کامل