Noise Reduction in Screw Compressors by the Control of Rotor Transmission Errors

نویسندگان

  • Christopher S. Holmes
  • CHRISTOPHER S. HOLMES
چکیده

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Noise Reduction in Screw Compressors by the Control of Rotor Transmission Error

There is considerable evidence from the field of helical gears that noise frequencies have a close correlation with transmission errors. The general theory was first published by Harris [1], with subsequent developements by Harris, Gregory & Munro [2]. Munro [3] has written an excellent review of the theory and measurement of transmission error. A text book with a broad coverage of the subject,...

متن کامل

Experimental Analysis of Screw Compressor Noise and Vibration

Very few reports have been presented to date on the noise and vibrational characteristics of oil injected screw compressors. This time. a series of extensive experimental analysis is performed. It includes the measurements and analysis of compressor casing vibrations. rotor shafts vibrations, torsional <rotational) vibrations. suction and discharge gas pulsations. pressure trans~ ient in one th...

متن کامل

Single Stage, Oil-Free Screw Compressor with a Compression Ratio Eight

The development of a series of sin~le-stage, oilfree screw air compressors with a compression ratio of 8, previously obtainable only with two-sta~e compressors, is described. A new rotor profile, which reduces leakage loss to achieve higher efficiency, and desig-ned for ease of manufacture, is detailed. Additionally, a new desig-n method for the clearance between rotors, to compensate for rotor...

متن کامل

Calculation of Rotor Interference in Screw Compressors

Small rotor clearances are today a vital prerequisite for an efficient screw compressor. The clearances are responsible for compressor leakages, small clearance will minimise them and thereby increase both, the volumetric and adiabatic efficiency. A continuous improvement in the rotor manufacturing equipment has been achieved during the recent years and tight production tolerances may now be ap...

متن کامل

Noise Source Identification in Semi-Hermetic Twin-Screw Compressors

The sound radiation characteristics of a semi-hermetic twin-screw compressor were studied while operating under controlled laboratory conditions at the Ray W. Herrick Laboratories of Purdue University. A fully-condensing load stand was designed to allow the 70 ton chiller system to be operated at the three standard loading capacities of the compressor. The load stand was operator controlled and...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2014