Single-beam Collective Effects in the Kek B-factory
نویسندگان
چکیده
In this paper, we deal with the issues of single-beam collective effects (the bunch lengthening and the transverse mode-coupling instability) and coupled-bunch beam instabilities due to RF cavities and the resistive-wall beam pipes in the KEK B-factory. The transit ion problem and coupled-bunch instabilities due to photo-electrons will be discussed in other publications.
منابع مشابه
The Proposed Experimental Study on Beam- Photoelectron Interactions in Bepc
A vertical collective effect suspected as photoelectron instability (PEI) has been observed at Photon Factory (PF) of KEK in recent years. This phenomena may impose a limitation on the performance of the proposed B-Factories or T-c Factories. An experiment has been planned to test it using positron beam at Beijing Electron Positron Collider (BEPC) in 1996 under the cooperation between IHEP and ...
متن کاملImpedance Budget for the Kek B-factory
In this paper, we deal with impedances of various beamline elements in the KEK B-Factory. We will also discuss the power deposition generated by a beam in the form of the higher-ordermode (HOM) losses by interacting with its surroundings.
متن کاملOptical Beamlines for the KEK B-Factory Synchrotron Radiation Monitors
We have designed and constructed two optical beamlines for the KEK B-Factory synchrotron radiation monitors, one for each ring. Each beamline transports the SR beam 30-40 meters to an external optics hutch along two parallel paths. One path is used for direct imaging with adaptive optics[1], the other is used for transverse beam size measurements via SR interferometer[2] and longitudinal profil...
متن کاملB-factory Interaction Region Design*
High luminosity B-factories are &enerally high current ( I 3 A) e+estorage ring accelerators that operate at a center-of-mass energy equal to the mass of the Upsilon (4S) resonance ( 10.58 GeV). The high beam currents are achieved by storing a large number of bunches (several hundred to several thousand) into each beam. Two designs, the ones located at SLAC and KEK, also have asymmetric beam en...
متن کاملStudy of the Magnetic Coupling between Quadrupole and Dipole Corrector Magnets for the Kek B-factory
Most of the quadrupole magnets in the KEK B-factory are accompanied by a set of vertical and horizontal dipole corrector magnets in both the LER and HER rings[1]. The typical separation between a quadrupole and a dipole corrector magnet is 202 mm, as measured from the laminated ends. This corresponds to ~3.7 (2.4) times of the bore radius of a quadrupole magnet in the arc (straight) sections. S...
متن کامل