Carrier-Based PWM-VSI Overmodulation Strategies: Analysis, Comparison, and Design
نویسندگان
چکیده
In this paper, the overmodulation region voltagegain characteristics and waveform quality of carrier-based pulsewidth-modulated (PWM) methods are investigated. Through detailed analytical study, voltage-gain characteristics are extracted independent of carrier frequency. The influence of blanking time and minimum pulsewidth (MPW) control on the inverter gain characteristics are studied and shown to be significant. A comparative evaluation of the modulator characteristics reveals the advantageous high-modulationrange characteristics of discontinuous PWM methods and, in particular, the superior overmodulation performance of a discontinuous PWM method. The modulation methods under consideration are tested on a PWM voltage-source inverter (VSI)fed induction motor drive in the laboratory, and the theoretical results are verified by experiments. Also, a gain linearization technique is presented and experimentally verified. The results of this study are useful in design, performance prediction, and development of high-performance overmodulation strategies for PWM-VSI drives.
منابع مشابه
Dynamic Overmodulation Characteristics of Triangle Intersection PWM Methods
In this paper, dynamic overmodulation characteristics of current-regulated carrier-based high-performance pulsewidth modulation (PWM) voltage-source inverter drives are investigated. Dynamic and steady-state overmodulation operating modes are clearly distinguished, and the requirements for obtaining high performance in each mode are shown to be significantly different. Dynamic overmodulation ch...
متن کاملSimple Analytical and Graphical Tools for Carrier Based PWM Methods
This paper provides analytical and graphical tools for the study, performance evaluation, and design of the modern carrier based PWM methods which are widely employed in PWM-VSI drives. Simple techniques for generating the modulation waves of the high performance PWM methods are described. The two most important modulator characteristics, the current ripple and the switching losses are analytic...
متن کاملPerformance Evaluation of Multilevel Inverter Based on Total Harmonic Distortion (thd)
In general Pulse width modulation (PWM) techniques of a voltage source inverter (VSI) need a sinusoidal reference signal and triangular carrier signal to generate the required modulating signals for the desired output. Modifications in modulating techniques can be considered in two ways, namely modified reference and modified carrier. The existing multilevel carrier based pulse width modulation...
متن کاملDesign and Performance Analysis of 7-Level Diode Clamped Multilevel Inverter Using Modified Space Vector Pulse Width Modulation Techniques
In this paper, a 7-level Diode Clamped Multilevel Inverter (DCMLI) is simulated with three different carrier PWM techniques. Here, Carrier based Sinusoidal Pulse Width Modulation (SPWM), Third Harmonic Injected Pulse Width Modulation (THIPWM) and Modified Carrier-Based Space Vector Pulse Width Modulation (SVPWM) are used as modulation strategies. These modulation strategies include Phase Dispos...
متن کاملSimple Analytical and Graphical Methods for Carrier-Based PWM-VSI Drives
This paper provides analytical and graphical methods for the study, performance evaluation, and design of the modern carrier-based pulsewidth modulators (PWM’s), which are widely employed in PWM voltage-source inverter (VSI) drives. Simple techniques for generating the modulation waves of the high-performance PWM methods are described. The two most important modulator characteristics—the curren...
متن کامل