Design of Radio Frequency ( Rf ) Mems Switches – Modeling

نویسندگان

  • Yong Zhu
  • Horacio D. Espinosa
چکیده

Mechanical modeling of RF MEMS switches is important for performance optimization and device reliability. 1-D, 2-D, and 3-D linear analytical models have been proposed to analyze the electrostatic pull-in of a fixed-fixed beam at small deflection. However, most RF MEMS switch structures work at large deflection range. In this paper, 1-D, 2-D, and 3-D nonlinear analytical models suitable for large structural deflection are developed in a generalized form. In some practical applications, finite element models are required to account for the effects of all the design parameters: switch geometry, non-uniform state of residual stress, temperature and etc. A 3-D finite element model between structural, electrical and thermal domains is developed. This 3-D model is applicable to the design of all types of electrostatic actuators, though that of a capacitive coupling switch was examined.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Modeling and Fabrication of RF MEMS Switches

MicroElectroMechanical Systems (MEMS) are becoming increasingly important. The benefits of MEMS include small size, low weight, and low cost. In addition, Radio Frequency MEMS switches offer low insertion loss, high quality factor, low power, high isolation, and broadband frequency performance. Modeling of electrostatically-actuated, capacitive switches is reviewed and fabrication steps are des...

متن کامل

RF MEMS Switches

An overview of the MEMS technology development and applications is given in this paper. A special attention is paid to the RF MEMS switches. Both series and shunt MEMS switches have been considered. It is also presented a technique for modeling and design of inductively-tuned MEMS shunt switch. Some very important issues for the device maturity e.g. reliability and packaging have been addressed.

متن کامل

Design and simulation of a RF MEMS shunt capacitive switch with low actuation voltage, low loss and high isolation

According to contact type, RF MEMS switches are generally classified into two categories: Capacitive switches and Metal-to-Metal ones. The capacitive switches are capable to tolerate a higher frequency range and more power than M-to-M switches. This paper presents a cantilever shunt capacitive RF MEMS switch with characteristics such as low trigger voltage, high capacitive ratio, short switchin...

متن کامل

Studies on RF MEMS shunt switch

Radio Frequency Micro-Electro-Mechanical-Systems (RF MEMS) based switches are expected to play a key role in the field of microwave switching. Traits like low-loss performance; zero-power consumption and very low inter-modulation distortion have made these switches well suitable for high-performance microwave and millimeter-wave circuits. The design of RF MEMS switches, however, require sophist...

متن کامل

Design, Analysis and Comparison of Various MEMS Switches for Reconfigurable Planar Antenna

This paper presents design and analysis of a novel beam for electrostatically actuated Radio Frequency Micro Electro Mechanical Systems (RF MEMS) shunt switches. In the proposed beam design, geometrical variations in terms of structure shape, material, gap, introduction of holes and changing the length and width of anchor have led to good RF performance. The holes in the beam (maximum up to 60%...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2004