Experimental Parametric Investigation of Temperature Effects on 60W-QCW Diode Laser
نویسندگان
چکیده
Nowadays, quasi-continuous wave diode lasers are used in a widespread variety of applications. Temperature effects in these lasers can strongly influence their performance. In this paper, the effects of temperature have been experimentally investigated on different features of a 60W-QCW diode laser. The obtained results indicate that the conversion efficiency and operation voltage of diode laser decrease with the augmentation of the working temperature associated with a redshift in the laser peak wavelength. Experimental results show the emission peak wavelength of laser shifts 0.26 nm and the conversion efficiency decreases 1.76 % with the increase of temperature from 40 to 50 ̊C. Present study also shows the slope efficiency decreases gradually at low temperatures and rapidly at higher temperatures. Regarding the close dependence of the mentioned parameters to the operating temperature, it is of great importance to carefully control the working temperature of diode laser, particularly for medical applications. Keywords—diode laser, experimentally, temperature, wavelength
منابع مشابه
Estimation of thermal fracture limits in quasi-continuous-wave end-pumped lasers through a time-dependent analytical model.
A time-dependent analytical thermal model of the temperature and the corresponding induced thermal stresses on the pump face of quasi- continuous wave (qcw) end-pumped laser rods is derived. We apply the model to qcw diode-end-pumped rods and show the maximum peak pump power that can be utilized without fracturing the rod. To illustrate an application of the model, it is applied to a qcw pumped...
متن کاملEvaluation of Diode laser (940 nm) irradiation effect on microleakage in class V composite restoration before and after adhesive application
Introduction: Nowadays, the main focus of dental studies is on adhesive dental materials; since clinical long-term success of bonded restorations depended more on marginal microleakage minimization. So, the aim of this study was Evaluation of Diode laser irradiation effect on microleakage in class V composite restoration before and after adhesive application. Materials and methods: In this in v...
متن کاملHigh-power diode lasers operating at 1800-2100-nm for LADAR and direct use in IRCM applications
A variety of applications are driving development of high power laser diodes operating between 1.8 and 2.1 μm. For example, military and space LADAR applications benefiting from low atmospheric absorption around 2.1 μm utilize Ho:YAG solid state lasers. Efficient direct diode pumping of these systems can be achieved with diode lasers operating around 1.9 μm. As another example, high power diode...
متن کاملParametric Investigation of Diode and CO2 Laser in Direct Metal Deposition of H13 Tool Steel on Copper Substrate
In the present investigation, H13 tool steel has been deposited on copper alloy substrate using both CO2 and diode laser. A detailed parametric analysis has been carried out in order to find out optimum processing zone for coating defect free H13 tool steel on copper alloy substrate. Followed by parametric optimization, the microstructure and microhardness of the deposited clads have been evalu...
متن کاملComparison of Soft Tissue Thermal Changes Induced by Three Types of Diode Lasers at 810, 940, and 980nm Wavelengths
Background and Aim: Diode laser is a great choice for soft tissue surgery. The diode laser is partially absorbed by hard dental tissues, making it safe for soft tissue surgery. This study aimed to compare the tissue thermal changes induced by three types of diode lasers at 810, 940, and 980nm wavelengths. Materials and Methods: In this in-vitro experimental study, using a diode laser device (c...
متن کامل