Color Stability of Restorative Resins
نویسنده
چکیده
The color stability of seven commercial composite resins, an unfilled resin, and three glazes was studied under conditions of accelerated aging by reflection spectrophotometry and visually with Munsell color tabs. After aging for 900 hours, most of the resins had lower values of luminous reflectance and excitation purity and higher values of dominant wavelength and contrast ratio compared to values at baseline.
منابع مشابه
Influence of Light-Curing Units on Color Stability of Composite Resins After Aging
Background and Aim: The use of composite restorations has increased in recent years. One of the most important problems with composite restorations is the loss of consistency between the composite and tooth color, which in most cases requires replacement. Materials and Methods: In this study, the color stability of 40 disc-shaped specimens (10 mm in diameter and 2 mm in height) from two types ...
متن کاملEffects of 0.2% Chlorhexidine and Re-polishing on the Color Stability of Nanofilled Composite Resins
Introduction: The growing demand for esthetic dental procedures has resulted in the increased development of new restorative composite resins. The success of composite resin restorations depends on their color stability over time. The present study aimed to evaluate the effects of 0.2% chlorhexidine (CHX) and re-polishing on the color stability of nanofilled composite re...
متن کاملColor Stability of New Esthetic Restorative Materials: A Spectrophotometric Analysis
The aim of this in vitro study was to evaluate and compare the color stability of different esthetic restorative materials (one microfilled composite, one nanofilled composite, one nanoceramic composite, one microfilled hybrid composite, one microfilled hybrid composite, one nanohybrid Ormocer based composite and one supra-nano spherical hybrid composite) after exposure to different staining so...
متن کاملEffects of air-polishing powders on color stability of composite resins
OBJECTIVES The purpose of this study was to investigate the effect of different air-polishing powders on the color stability of different types of composite resin restorative materials. MATERIAL AND METHODS Thirty cylindrical specimens (15×2 mm) were prepared for each of 7 composite resin restorative materials. All specimens were polished with a series of aluminum oxide polishing discs (Sof-L...
متن کاملIn vitro color and roughness stability of different temporary restorative materials.
OBJECTIVE The aim of this study was to evaluate the effects of staining solutions on the color stability and roughness of different provisional resin material. MATERIAL AND METHODS Three different materials were tested (two polymethylmethacrylate and one bis-acryl composite resins) in cola and coffee and for 1 and 4 weeks. 240 specimens were used - half of them polished and other half not. Co...
متن کامل