Microstrip Antenna Array for Beamforming Systems
نویسندگان
چکیده
A dual and quad element antenna array resonating at 2.4 GHz with narrow beam is proposed in this paper. An intention to put forward this work is to make use of microstrip patch antennas in beamforming to form directional beams in analog and digital domains; reducing co-channel / multipath interferences and improving Quality of Service (QoS) for senor arrays and 3G wireless networks. The size of dual and quad element antenna array is 60 x 130 mm2 and 60 x 240 mm2 respectively. Simulations in HFSS (High Frequency Structure Simulator) showed least mutual coupling among adjacent elements and prototypes have been fabricated using FR4 to verify the efficiency of the presented work for IEEE 802.11b/g WLAN standards. Streszczenie. W artykule przedstawiono dwui czteroelementowy układ anten o wąskim strumieniu promieniowania, o częstotliwości rezonansowej 2,4 GHz oraz możliwości wykorzystania w przesyle sygnału. (Układ anten mikropaskowych w systemach kształtowania strumienia promieniowania antenowego)
منابع مشابه
Analyze a various specifications of Microstrip Patch Array Antenna Using Beamforming Method for ISM Band Applications
In this paper, the design of 4x4 smart antenna array antenna along with the butler matrix network which can be used for beamforming (pointing an antenna array). Unlike the conventional schemes where an array of microstrip patch antennas are used, the radiation becomes omnidirectional and therefore the power losses are more. In the proposed design, the designed antenna is operating at the freque...
متن کاملBandwidth Enhancement of Microstrip Comb-Line Antenna Fed from Both Ends
Millimeter-wave antennas have been developed for various applications such as broadband high-speed wireless communication systems and automotive radar systems. Microstrip antennas are more advantageous than other millimeter-wave antennas at the viewpoints of low profile and low cost [1]. On the other hand, transmission loss of microstrip line is significant problem in array feeding. So, microst...
متن کاملDevelopment of SATB Based on LIEH Shaped Patch Antenna for Digital Beamforming System
This paper presents the design and development of the smart antenna system testbed (SATB). The SATB is developed based on using the novel L-probe fed inverted hybrid E-H (LIEH) microstrip patch element design arranged into 4×1 uniform linear array antenna. This paper reports the development of a software reconfigurable testbed for the implementation and evaluation of digital beamforming algorit...
متن کاملDesign Investigation of Microstrip Patch and Half-Mode Substrate Integrated Waveguide Cavity Hybrid Antenna Arrays
In this paper two linear arrays including a linear 1×4 and a planar 2×2 of microstrip patch and half-mode substrate integrated waveguide (SIW) cavity hybrid antenna are introduced and investigated. These are simply implemented using low cost single layer printed circuit board (PCB) process. The array element consists of a rectangular microstrip patch with appropriate dimensions in the vicinity ...
متن کاملModeling and simulation of Microstrip patch array for smart antennas
The aim of the paper is two fold. One is to design and simulate an antenna array suitable for wireless applications and the other is the design of beamforming algorithm. In this paper, the first module presents the design of multiple microstrip rectangular patch elements suitable for beamforming technique in wireless applications in the range of 1.8 2.4 GHz. By designing 1x8 patch array, it is ...
متن کامل