Improved hole-injection contact for top-emitting polymeric diodes
نویسندگان
چکیده
Articles you may be interested in Lithium fluoride injection layers can form quasi-Ohmic contacts for both holes and electrons Appl. Efficient inverted top-emitting organic light-emitting diodes using ultrathin MoO 3 / C 60 bilayer structure to enhance hole injection Appl. Tuning hole injection and charge recombination with self-assembled monolayer on silver anode in top-emitting organic light-emitting diodes Appl. Effect of magnesium oxide buffer layer on performance of inverted top-emitting organic light-emitting diodes
منابع مشابه
Polymeric anodes for improved polymer light-emitting diode performance
We have studied polyaniline and polyethylenedioxythiophene transparent electrodes for use as hole-injecting anodes in polymer light emitting diodes. The anodes were doped with a variety of polymer and monomer-based acids and cast from either water or organic solvents to determine the effect of the dopant and solvent on the hole-injection properties. We find that the anodes with polymeric dopant...
متن کاملPhoto-Crosslinking of Pendent Uracil Units Provides Supramolecular Hole Injection/Transport Conducting Polymers for Highly Efficient Light-Emitting Diodes
A new process for modifying a polymeric material for use as a hole injection transport layer in organic light-emitting diodes has been studied, which is through 2π + 2π photodimerization of a DNA-mimetic π-conjugated poly(triphenylamine-carbazole) presenting pendent uracil groups (PTC-U) under 1 h of UV irradiation. Multilayer florescence OLED (Organic light-emitting diodes) device with the PTC...
متن کاملOn the Hole Injection for III-Nitride Based Deep Ultraviolet Light-Emitting Diodes
The hole injection is one of the bottlenecks that strongly hinder the quantum efficiency and the optical power for deep ultraviolet light-emitting diodes (DUV LEDs) with the emission wavelength smaller than 360 nm. The hole injection efficiency for DUV LEDs is co-affected by the p-type ohmic contact, the p-type hole injection layer, the p-type electron blocking layer and the multiple quantum we...
متن کاملHighly efficient hybrid inorganic-organic light-emitting diodes by using air-stable metal oxides and a thick emitting layer.
During the last two decades, considerable progress has been made with the device efficiency and lifetime of organic lightemitting diodes (OLEDs), enabling their application in flatpanel displays and solid-state lighting. To realize high-performance, full-color OLED devices as commercial products, it is necessary to further improve the power efficiency and lifetime of the devices. To date, resea...
متن کاملThin-film Encapsulation of Organic Light-Emitting Diodes Using Single and Multilayer Structures of MgF2, YF3 and ZnS
In this research, the lifetime of green organic light emitting diodes (OLEDs) is studied using four passivation layers. To encapsulate the OLEDs, MgF2, YF3, composed of alternating MgF2/ZnS and YF3/ZnS layers were grown by thermal vacuum deposition. Measurements show that the device lifetime is significantly improved by using YF3 and ZnS as passivation layers. However, diodes encapsulated by Mg...
متن کامل