Effect of Ultraviolet Aging on Rheology and Chemistry of LDH-Modified Bitumen
نویسندگان
چکیده
Layered double hydroxides (LDHs) are an ultravioletlight (UV)-resistant material. In this study, two types of LDHs (Mg-Al-LDHs and Zn-Al-LDHs) were applied to modify bitumen by melt-blending. The effect of ultraviolet aging on the rheology and chemistry of LDH-modified bitumen was studied by means of dynamic shear rheometer (DSR), thin-layer chromatography with flame ionization detection (TLC-FID), Fourier transform infrared spectroscopy (FTIR), and Ultraviolet-Visible (UV-Vis) spectrophotometry to reveal the mechanisms of action for LDHs and bitumen. The results showed that within the UV spectra (220-400 nm), the reflectance of Zn-Al-LDHs was larger than that of Mg-Al-LDHs. These two LDHs have different influences on the performance of bitumen. Mg-Al-LDHs had a more obvious influence on the physical and dynamic rheological properties of bitumen than Zn-Al-LDHs. Zn-Al-LDHs improved the UV-aging resistance of bitumen more. The reason can be that the reflectance of the Zn-Al-LDHs to the UV light is larger than that of the Mg-Al-LDHs. The Zn-Al-LDH-modified bitumen had more potential to improve the UV-aging resistance during the service life of asphalt pavement.
منابع مشابه
Optical and UV-Aging Properties of LDH-Modified Bitumen
Layered double hydroxides (LDHs) are an ultraviolet-light (UV) resistant material. In this study, LDHs were used to modify bitumen. The optical and UV aging properties of LDHs modified bitumen were investigated. Firstly, the thin films of bitumen, with and without LDHs, were prepared. By using the UV-Vis spectrophotometer, absorbance, reflectance, and transmittance of bituminous thin film were ...
متن کاملPerformance Evaluation of SBS/sulfur Modified Bitumen and its Effect on Fuel Resistance
The fuel resistance property plays an important role in asphalts, but available standards for determining this characteristic are presently lacking. In the present work, a number of polymer modified bitumen with styrene-butadiene-styrene (SBS) polymer (4, 5, 6% SBS) and SBS/ sulfur modified bitumen with various percentages of sulfur (1.65, 3, 3.5% based on polymer content) were prepared. Each s...
متن کاملIdentification Effect of Nanoclay on Engineering Properties of Asphalt Mixtures
Nanoclays are new generation of processed clays of interest in a wide range of high performance composites. In other words, nanoclay is defined as a clay that can be modified to make the clay complexes compatible with organic monomers and polymers. Here, it can be said that the polymeric nanocomposites are among the most exciting and promising classes of materials discovered recently. A number ...
متن کاملRheological properties of modified Bitumen: Comparison of waste polymers’ performance
In this investigation, rheological properties of three different polymer-modified bitumen compounds containing recycled polyethylene terephthalate (R-PET), crumb rubber (CR) and poly (styrene-butadiene-styrene) (SBS) are evaluated and compared. The modified samples were tested by a dynamic shear rheometer (DSR) where complex modulus (G*), phase angle (δ) and rutting resistance (G*/Sinδ) of spec...
متن کاملStudy on UV-shielding mechanism of layered double hydroxide materials.
The development of UV-shielding materials has attracted considerable attention in the field of coatings and sunscreen. This paper reports the UV-shielding mechanism of layered double hydroxide (LDH) materials in terms of chemical composition, structure and morphology, by using (LDH/PAA)n films (n stands for bilayer number) through alternate LBL assembly of LDH nanoparticles and poly(acrylic aci...
متن کامل