Non-Destructive Analysis of Degradation Mechanisms in Cycle-Aged Graphite/LiCoO2 Batteries

نویسندگان

  • Liqiang Zhang
  • Lixin Wang
  • Chao Lyu
  • Junfu Li
  • Jun Zheng
  • Sheng S. Zhang
چکیده

Non-destructive analysis of degradation mechanisms can be very beneficial for the prognostics and health management (PHM) study of lithium-ion batteries. In this paper, a type of graphite/LiCoO2 battery was cycle aged at high ambient temperature, then 25 parameters of the multi-physics model were identified. Nine key parameters degraded with the cycle life, and they were treated as indicators of battery degradation. Accordingly, the degradation mechanism was discussed by using the multi-physics model and key parameters, and the reasons for capacity fade and the internal resistance increase were analyzed in detail. All evidence indicates that the formation reaction of the solid electrolyte interface (SEI) film is the main cause of battery degradation at high ambient temperature.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Capacity Decay Mechanism of the LCO + NMC532/Graphite Cells Combined with Post-Mortem Technique

Lithium ion batteries are widely used in portable electronics and transportations due to their high energy and high power with low cost. However, they suffer from capacity degradation during long cycling, thus making it urgent to study their decay mechanisms. Commercial 18650-type LiCoO2 + LiNi0.5Mn0.3Co0.2O2/graphite cells are cycled at 1 C rate for 700 cycles, and a continuous post-mortem ana...

متن کامل

Superior storage performance of a Si@SiOx/C nanocomposite as anode material for lithium-ion batteries.

Rechargeable lithium-ion batteries are essential to portable electronic devices. Owing to the rapid development of such equipment there is an increasing demand for lithium-ion batteries with high energy density and long cycle life. For high energy density, the electrode materials in the lithium-ion batteries must possess high specific storage capacity and coulombic efficiency. Graphite and LiCo...

متن کامل

NMR studies of cathode materials for lithium-ion rechargeable batteries.

Lithium intercalation or insertion materials have been widely investigated in the search for new electrode materials for use in high-voltage rechargeable batteries.1-6 The first commercial Li-ion rechargeable battery contains the layered materials LiCoO2 (Figure 1) and graphite as the cathode (or positive electrode) and anode (or negative electrode), respectively.7 Although this battery is the ...

متن کامل

Scalable synthesis of silicon-nanolayer-embedded graphite for high-energy lithium-ion batteries

Existing anode technologies are approaching their limits, and silicon is recognized as a potential alternative due to its high specific capacity and abundance. However, to date the commercial use of silicon has not satisfied electrode calendering with limited binder content comparable to commercial graphite anodes for high energy density. Here we demonstrate the feasibility of a next-generation...

متن کامل

Tracking Displacement Reactions in CuxV2O5 Cathodes by in-situ TEM

In order to meet the growing demand of the rapidly-miniaturized electronics and high-power mobile devices (i.e. hybrid electric vehicles), a lot of new electrode materials are studied to replace the traditional LiCoO2 (cathode) and graphite (anode). Cu-V-O compounds with high capacity (~250-500 mAh.g -1 ) have emerged as one of the most promising cathode materials for next-generation lithium io...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2014