Small boundary-pulse-width control for dc to ac single-phase inverters
نویسنده
چکیده
The main purpose of pulse-width –modulation technique for power inverters is to control the output voltage. The most familiar techniques: uniform-pulse-width-modulation and sinusoidal-pulsewidth-modulation. This paper proposes new techniques for improving the inverter performance. The methods are based on pulse-width technique. A variation of pulse-widths for the middle and boundary pulses is implemented, to reduce the harmonic effect and obtaining an improved inverter operation. Result in reduced harmonics of the inverter output voltage and an optimum operation is obtained through using small boundary-pulse-width technique.
منابع مشابه
Introduction and Analysis of a Novel Quasi - Series Resonant DC Link
Soft Switcing techniques have recently been applied in the design of dc-ac converters, in order to achive better performance, higher efficiency, and power density. One of the soft switching techniques uesd in inverters is resonant dc links. These topologies have some disadvantages such as irregular current peaks, large voltage peaks, uncotrollble pulse width, etc. Another soft switching method ...
متن کاملIntroduction and Analysis of a Novel Quasi - Series Resonant DC Link
Soft Switcing techniques have recently been applied in the design of dc-ac converters, in order to achive better performance, higher efficiency, and power density. One of the soft switching techniques uesd in inverters is resonant dc links. These topologies have some disadvantages such as irregular current peaks, large voltage peaks, uncotrollble pulse width, etc. Another soft switching method ...
متن کاملThe Vector Control of Three-Phase Salient Pole Synchronous Machines Supplied by Pulse-Width- Modulated Voltage Source Inverters
In this paper, computer simulation of a three-phase synchronous motor drive is described. This drive/system is supplied with a new type of pulse-width modulated voltage source inverter (PWM VSI) whose amplitude of the first harmonic, compared to a conventional sinusoidal PWM VSI, is increased by about 17% and whose amplitude of higher harmonics is also reduced inversely proportional to their or...
متن کاملA Novel Multilevel AC/DC/AC Single phase to Three Phase Converter for Induction Motor Application
Power electronic inverters are widely used in various industrial drive applications. To overcome the problems of the limited voltage and current ratings of power semiconductors devices, some kinds of series and/or parallel connections are necessary. Recently, the multilevel inverters have received more attention in literature due to their ability to synthesize waveforms with a better harmonic s...
متن کاملSpace Vector Modulation Based on Classification Method in Three-Phase Multi-Level Voltage Source Inverters
Pulse Width Modulation (PWM) techniques are commonly used to control the output voltage and current of DC to AC converters. Space Vector Modulation (SVM), of all PWM methods, has attracted attention because of its simplicity and desired properties in digital control of Three-Phase inverters. The main drawback of this PWM technique is its complex and time-consuming computations in real-time im...
متن کامل