Inverse and Direct Dynamic Modeling of Gough - Stewart Robots
ثبت نشده
چکیده
This paper presents closed form solutions for the inverse and direct dynamic models of the Gough-Stewart parallel robot. The models are obtained in terms of the Cartesian dynamic model elements of the legs and of the Newton-Euler equation of the platform. The final form has an interesting and intuitive physical interpretation. The base inertial parameters of the robot, which constitute the minimum number of inertial parameters, are explicitly determined. The number of operations to compute the inverse and direct dynamic models are given.
منابع مشابه
An Inverse Dynamic Model of the Gough-Stewart Platform
In this paper a new formulation of the inverse dynamic model of the Gough-Stewart platform is proposed. This approach is based on the methodology developped by Khalil. The platform is considered as a multi robot system moving a common load. Using a global formalism, the Jacobian and inertia matrices of each segment are computed in a factorized form. This paper provides a basis for parallel algo...
متن کاملDynamic Modeling and Simulation of Stewart Platform
Since a parallel structure is a closed kinematics chain, all legs are connected from the origin of the tool point by a parallel connection. This connection allows a higher precision and a higher velocity. Parallel kinematic manipulators have better performance compared to serial kinematic manipulators in terms of a high degree of accuracy, high speeds or accelerations and high stiffness. Theref...
متن کاملKinematic and Inverse Dynamic Analysis of a C5 Joint Parallel Robot
Parallel manipulators have been proposed to overcome accuracy problem in the end effector positioning, exhibited by serial manipulators(Stewart, 1965)(Reboulet, 1988)(Merlet, 2000). These parallel robots are primarly used in the applications for which the considered processes require a high degree of accuracy, high speeds or accelerations. Aircraft simulator (Stewart, 1965), machining tools (Ne...
متن کاملKinematic modeling of stewart-gough platforms
This paper describes a method to solve the direct kinematics of a generic Stewart-Gough manipulators. The method is formulated in terms of a search in the space of rigid body transformations. The underlying idea is that the solutions of the direct kinematics can be obtained by moving the end-effector body according rotations and translations and accounting for the rigidity conditions. The paper...
متن کاملCharacteristics analysis of joint space inverse mass matrix for the optimal design of a 6-DOF parallel manipulator
An optimal designmethod for the Gough–Stewart platformmanipulators based on dynamic isotropy is proposed. First, a dynamic isotropy measure is derived from the analysis of the natural frequencies of a Stewart platform at a neutral pose using the inverse of the joint space mass matrix. Next, considering a specific Gough–Stewart platform (SGSP), it is found that, when the payload inertia matrix i...
متن کامل