Nanostructurization and thermal properties of polyethylenes’ welds
نویسندگان
چکیده
As it is known, polyethylene (PE) is one of the common materials in the modern world, and PE products take the major share on industrial and trade markets. For example, various types of technical PE like PE-63, PE-80, and PE-100 have wide industrial applications, i.e., in construction, for pipeline systems etc. A rapid development of plastics industry outstrips detailed investigation of welding processes and welds' formation mechanism, so they remain unexplored. There is still no final answer to the question how weld's microstructure forms. Such conditions limit our way to the understanding of the problem and, respectively, prevent scientific approaches to the welding of more complicated (from chemical point of view) types of polymers than PE. Taking into account state-of-the-art, the article presents results of complex studies of PE weld, its structure, thermophysical and operational characteristics, analysis of these results, and basing on that some hypotheses of welded joint and weld structure formation. It is shown that welding of dissimilar types of polyethylene, like PE-80 and PE-100, leads to the formation of better-ordered crystallites, restructuring the crystalline phase, and amorphous areas with internal stresses in the welding zone.
منابع مشابه
AN EVALUATION OF THERMAL STABILITY IN DISSIMILAR WELDS BETWEEN 310 STAINLESS STEEL AND ALLOY 657
Abstract: The investigation is carried out to characterize welding of AISI 310 austenitic stainless steel to Inconel 657 nickel-chromium superalloy. The welds were produced using four types of filler materials: the nickel-based corresponding to Inconel 82, Inconel A, Inconel 617 and austenitic stainless steel 310. This paper describes the effects of aging treatment on the joint. The compara...
متن کاملRelaxation behavior of polyethylene welded joints
The paper presents results of the investigation of structure relaxation and thermal properties of PE-80 and PE-100 polyethylene hot-tool butt welds. It was found that a weld with the re-crystallized crystalline structure is formed during the welding of dissimilar types of polyethylene. It is shown that within a long period (1 year) the relaxation occurs not only in amorphous but also in the cry...
متن کاملEffect of Microstructural Variations on the Tensile and Fracture Toughness Properties of Alloy 718 Welds
The effect of microstructural variations on the tensile and fracture toughness properties of Alloy 718 welds is reviewed. The microstructural parameters surveyed include heat treatment, longterm thermal aging and neutron irradiation. The two heat treatments that were characterized include the conventional heat treatment, per ASTM B637, and a modified heat treatment designed to improve the tough...
متن کاملEvaluation of Microstructure and Mechanical Properties of Ti6A14V / (WC-Co) Friction Welds
The metallurgical and mechanical properties of Ti6Al4V/(WC-Co) friction welds have ben investigated. The microstructure close to the bondline comprised a mixture of acicular and equiaxed α plus β phases. The diffusion of elements in the welded specimens has been detected. The fracture strengths of Ti6Al4V/(WC-Co) friction welds markedly improved when the cobalt content in the (WC-Co) carbide su...
متن کاملEvaluation of Microstructure and Mechanical Properties of Ti6A14V / (WC-Co) Friction Welds
The metallurgical and mechanical properties of Ti6Al4V/(WC-Co) friction welds have ben investigated. The microstructure close to the bondline comprised a mixture of acicular and equiaxed α plus β phases. The diffusion of elements in the welded specimens has been detected. The fracture strengths of Ti6Al4V/(WC-Co) friction welds markedly improved when the cobalt content in the (WC-Co) carbide su...
متن کامل