In situ monitoring magnetism and resistance of nanophase platinum upon electrochemical oxidation
نویسندگان
چکیده
Controlled tuning of material properties by external stimuli represents one of the major topics of current research in the field of functional materials. Electrochemically induced property tuning has recently emerged as a promising pathway in this direction making use of nanophase materials with a high fraction of electrode-electrolyte interfaces. The present letter reports on electrochemical property tuning of porous nanocrystalline Pt. Deeper insight into the underlying processes could be gained by means of a direct comparison of the charge-induced response of two different properties, namely electrical resistance and magnetic moment. For this purpose, four-point resistance measurements and SQUID magnetometry were performed under identical in situ electrochemical control focussing on the regime of electrooxidation. Fully reversible variations of the electrical resistance and the magnetic moment of 6% and 1% were observed upon the formation or dissolution of a subatomic chemisorbed oxygen surface layer, respectively. The increase of the resistance, which is directly correlated to the amount of deposited oxygen, is considered to be primarily caused by charge-carrier scattering processes at the metal-electrolyte interfaces. In comparison, the decrease of the magnetic moment upon positive charging appears to be governed by the electric field at the nanocrystallite-electrolyte interfaces due to spin-orbit coupling.
منابع مشابه
The investigation of pyrocatechol electrochemical mechanism in presence of nitrite ion on platinum electrode
In this study, the electrochemical mechanism of catechol in presence and absence of nitrite ion, is investigated in phosphate buffer medium (pH=7) using platinum electrode through cyclic voltammetry method in various scan rates. Electrochemical oxidation of catechol showed how quinone has changed to o-benzoquinone and also how o-benzoquinone has reacted with nitrite ion and potential scan rate ...
متن کاملNickel Base Superalloy Rene®80 – The Effect of High Temperature Cyclic Oxidation on Platinum-Aluminide Coating Features
Nickel base superalloy alloys are used in the manufacture of gas turbine engine components, which in use are exposed to high temperatures and corrosive environments. The platinum aluminide coatings described here have been developed to protect nickel base superalloy alloys from oxidation. In this study, the effect of cyclic oxidation, platinum layer thickness and aluminizing process on beha...
متن کاملPreparation of Poly-N-Methylpyrrole Coated Platinum Modified Electrode in Chloroform in the Presence of Various Supporting Electrolytes and Its Use for the Catalytic Oxidation of Ascorbic Acid and Hydroquinone
The electrochemical preparation of poly-N-methylpyrrole (PMPy) coated platinum electrode in chloroform in the presence of tetrabutylammonium Perchlorate, hexafluorophosphate, hydrogensulphate, Periodate and Iodide as supporting electrolytes was performed. The influence of electrosynthesis method, dopant anion type and operation temperature on electrochemical behavior of polymer were demonst...
متن کاملIntermediate stages of electrochemical oxidation of single-crystalline platinum revealed by in situ Raman spectroscopy
Understanding the atomistic details of how platinum surfaces are oxidized under electrochemical conditions is of importance for many electrochemical devices such as fuel cells and electrolysers. Here we use in situ shell-isolated nanoparticle-enhanced Raman spectroscopy to identify the intermediate stages of the electrochemical oxidation of Pt(111) and Pt(100) single crystals in perchloric acid...
متن کاملDesign of Highly Uniform Platinum and Palladium Nanoparticle Decoration on TiO2 Nanotube Arrays: An Efficient Anode to the Electro-Oxidation of Alcohols
We explore electro-catalytic properties of a system consisting of platinum and palladium nanoparticles dispersed over a nanotubular self-organized TiO2 matrix. These electrodes prepared by electroess and microemulsion of palladium and palladium nanoparticles on to TiO2 nanotubes, respectively. Titanium oxide nanotubes were fabricated by anodizing titanium foil in ethylene glycol (EG) fluoride-c...
متن کامل