Stabilized forms of orthogonal residual and constant incremental work control path following methods
نویسنده
چکیده
Stabilized versions of the orthogonal residual and constant incremental work control path following methods are introduced. These new methods overcome the difficulty observed in the original methods when traversing the equilibrium path near displacement limit points. The modification automatically relaxes the orthogonality constraint near the displacement limit points. In addition, the modified methods can ideally be used in conjuction with iterative linear solvers.
منابع مشابه
Some Geometrical Bases for Incremental-Iterative Methods (RESEARCH NOTE)
Finding the equilibrium path by non-linear structural analysis is one of the most important subjects in structural engineering. In this way, Incremental-Iterative methods are extremely used. This paper introduces several factors in incremental steps. In addition, it suggests some control criteria for the iterative part of the non-linear analysis. These techniques are based on the geometric of e...
متن کاملAn Experimental Study on the process parameters of Incremental Forming of Explosively-Welded Al/Cu Bimetal
Single point incremental sheet metal forming is a sheet metal forming process that forms products without the complex dies and tools with low cost. In this study, the incremental sheet metal forming process has been experimentally investigated on the explosively-welded Al/Cu bimetal sheets. Also, the effects of process parameters, such as arrangement of layer`s bimetal, tool diameter and tool p...
متن کاملDesign of an Intelligent Controller for Station Keeping, Attitude Control, and Path Tracking of a Quadrotor Using Recursive Neural Networks
During recent years there has been growing interest in unmanned aerial vehicles (UAVs). Moreover, the necessity to control and navigate these vehicles has attracted much attention from researchers in this field. This is mostly due to the fact that the interactions between turbulent airflows apply complex aerodynamic forces to the system. Since the dynamics of a quadrotor are non-linear and the ...
متن کاملApplication of Pulse Method to Incremental Slitting Measurement of Residual Stresses in Laminated Composites
In this research, the incremental slitting method was employed to determine throughthickness residual stress profile of a carbon/epoxy laminate. The method involves measuring strains at the back surface of the stressed specimen, while a narrow slit is cut by a CNC milling machine progressively from the top surface of the specimen. "Pulse Method" was selected as the computational approach for th...
متن کاملشکلهای مختلف سرب، نیکل و کادمیم در یک خاک آهکی تیمار شده با لجن فاضلاب
Application of sewage sludge on the farmland as a source of crop nutrient had recently received considerable attention. Some management practices may be required to control the accumulation of toxic elements including Pb, Ni and Cd. Sequential extraction gives useful information on plant bioavailability of the elements. The objective of this study was to investigate the cumulative and residual ...
متن کامل