Comments on Skin Effect in Solitary Solid Tubular Conductor
نویسنده
چکیده
J. C. Maxwell derived formulae for the calculation of current density and current in a cylindrical conductor supplied with variable current. In the 1950s K. Simonyi published a method for calculating current density in a cylindrical conductor made up of two conductors, cylindrical and tubular, of different resistivities. The present paper proves that Simonyi’s result is incorrect. The main attention is devoted to the method of calculating current density in a tubular conductor made up of tubular conductors of different resistivities.
منابع مشابه
Study on Defect Detecting and Locating Method of Tubular Cylindrical Conductor
This paper is to present a defect detecting and locating method of tubular cylindrical conductor based on alternating current impedance measurement theory. A defect estimation can be made through the impedance measurement of some distance on the inner and the outer surfaces of the tubular cylindrical conductor. A defect in the thickness direction can be located by the skin effect influence on i...
متن کاملInvestigating of the Effect of Concrete Confinement on the Axial Performance of Circular Concrete Filled Double-Skin Steel Tubular (CFDST) Long Columns
In this study, the co-operation of steel and concrete in composite columns is considered. Using numerical modeling to study the behavior of these sections, a new type of sections, namely Concrete Filled Double-Skin steel Tubular (CFDST) columns, is introduced. The parameters and techniques that influence the numerical simulation that bring this modeling closer to...
متن کاملDynamic Response Analysis of the Planar and Tubular Solid Oxide Fuel Cells to the Inlet Air Mass Flow Rate Variation
The purpose of present study is to investigate the dynamic response of two conventional types of solid oxide fuel cells to the inlet air mass flow rate variation. A dynamic compartmental model based on CFD principles is developed for two typical planar and tubular SOFC designs. The model accounts for transport processes (heat and mass transfer), diffusion processes, electrochemical processes, a...
متن کاملStructure Formation in Anode and Its Effect on the Performance of Micro-Tubular SOFC: A Brief Review
Anode-supported micro-tubular solid oxide fuel cell (SOFC) offers many advantages over the electrolyte and cathode-supported confgurations in terms of simplicity, reliability, and efciency. In such design, the anode substrates should possess a highly porous structure, provide active sites reaction as well as serving good mechanical strength. This structure is desired to ...
متن کامل3D Investigation of Tubular PEM Fuel Cell Performance Assuming Fluid- Solid- Heat Interaction
According to the declining trend of fossil fuel resources and the need to use renewable energies, appropriate research should be conducted for technical and functional studies in this regard. Therefore, in this research, a tubular PEM fuel cell as a suitable energy source with three-dimensional geometry has been numerically simulated and investigated. For a comprehensive study, the equations o...
متن کامل