Single-Cycle Impulse from Detonation Tubes with Nozzles

نویسندگان

  • M. Cooper
  • J. E. Shepherd
چکیده

Experiments measuring the single-cycle impulse from detonation tubes with nozzles were conducted by hanging the tubes in a ballistic pendulum arrangement within a large tank. The detonation-tube nozzle and surrounding tank were initiallyfilledwith air between 1.4 and 100kPa in pressure simulating high-altitude conditions.A stoichiometric ethylene–oxygen mixture at an initial pressure of 80 kPa filled the constant-diameter portion of the tube. Four diverging nozzles and six converging–diverging nozzleswere tested. Two regimes of nozzle operationwere identified, depending on the environmental pressure. Near sea-level conditions, unsteady gas-dynamic effects associated with the mass of air contained in the nozzle increase the impulse as much as 72% for the largest nozzle tested over the baseline case of a plain tube. Near vacuum conditions, the nozzles quasi-steadily expand the flow, increasing the impulse as much as 43% for the largest nozzle tested over the baseline case of a plain tube. Competition between the unsteady and quasi-steady-flow processes in the nozzle determine the measured impulse as the environmental pressure varies.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

The Effect of Transient Nozzle Flow on Detonation Tube Impulse

Impulse generation with gaseous detonation requires conversion of chemical energy into mechanical energy. Because of the poor performance of straight detonation tubes compared to conventional propulsion systems and the success of using nozzles on rocket engines, the effect of nozzles on detonation tubes is being investigated. The first experimental investigation measuring impulse by gaseous det...

متن کامل

Effect of Porous Thrust Surfaces on Detonation Transition and Detonation Tube Impulse

As pulse detonation engine development matures, it becomes increasingly important to consider how practical details such as the implementation of valves and nozzles will affect performance. Inlet valve timing and valveless inlet designs may result in flow of products back upstream and, consequently, reduction in impulse over the ideal case. Although proper inlet design or operation under flowin...

متن کامل

Venting Optimization of a Pulse

A one-dimensional method-of-characteristics (MOC) code was developed to examine the venting of pulse detonation engines. Comparison with experimental results and twodimensional computational fluid dynamics demonstrates that a reasonably accurate level of simulation can be achieved with a single spatial dimension. A semi-empirical, deflagrative, flame-acceleration model was also constructed and ...

متن کامل

Detonation Tube Impulse in Subatmospheric Environments

Thrust from a multicycle pulse detonation engine operating at practical flight altitudes will vary with surrounding environment pressure. We have carried out the first experimental study using a detonation tube hung in a ballistic pendulum arrangement within a large pressure vessel to determine the effect that the environment has on the single-cycle impulse. Air pressure decreased below 100 kPa...

متن کامل

Pulse Detonation Engines: Initiation, Propagation, and Performance

Research carried out from 2003-2005 at the Explosion Dynamics Laboratories at Caltech under an ONR contract has examined many issues critical to Pulse Detonation Engine (PDE) development. These include: detonation structure imaging using OH PLIF; a narrow channel facility for examining regular and irregular detonations; detonation diffraction; mechanism of soot track generation; fundamental and...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2007