Titanium oxide film for the bottom antireflective layer in deep ultraviolet lithography.
نویسندگان
چکیده
Titanium oxide thin film, fabricated with tetraisopropyltitanate and oxygen by electron cyclotron resonance-plasma-enhanced chemical vapor deposition, is investigated as a potential candidate for the antireflective layer in KrF excimer laser (248-nm) lithography. The oxygen flow-rate dependence of the optical properties such as the refractive index (n) and the extinction coefficient (k) of the film at the 248-nm wavelength has been characterized, and the films with the expected combinations of n and k values for the antireflective layer have been deposited. Simulation results indicate that reflectance values of less than 4% and as low as 1.2% can be reached at the interface between the photoresist and the film postulating the structures of the photoresist/300-A TiO(x) film/c-Si substrate and the W-Si substrate, respectively, by selected proper combinations of n and k values. Moreover the reflectance can be further reduced to almost zero by changing the film thickness. Thus it is found that titanium oxide thin films can be used as the bottom antireflective layer in KrF excimer laser lithography.
منابع مشابه
Optical Studies and Photovoltaic Performance of Nanocrystalline Titanium Dioxide Sensitized with Local Dye
Nanocrystalline titanium (iv) oxide paste has been deposited on Fluorine doped tin oxide glass substrate by the blade method. The deposited film was subjected to thermal treatment to obtain an electrode foe a photo-electrochemical cell. The electrode was sensitized with prophyrin dye which was a local dye extracted from carica papaya leaves. Avaspec 2.1 spectrophotometer was used to obtain the ...
متن کاملSol-gel Synthesis and Optical Characterisation of TiO2 Thin Films for Photovoltaic Application
TiO2 thin films have been prepared by the sol-gel dipcoating technique in order to elaborate antireflective thin films for monocrystalline silicon (mono-Si). The titanium isopropoxyde was chosen as a precursor with hydrochloric acid as a catalyser for preparing a stable solution. The optical properties have been tailored with varying the solution concentration, the withdrawn speed, and the heat...
متن کاملFabrication of a new type of organic-inorganic hybrid superlattice films combined with titanium oxide and polydiacetylene
We fabricated a new organic-inorganic hybrid superlattice film using molecular layer deposition [MLD] combined with atomic layer deposition [ALD]. In the molecular layer deposition process, polydiacetylene [PDA] layers were grown by repeated sequential adsorption of titanium tetrachloride and 2,4-hexadiyne-1,6-diol with ultraviolet polymerization under a substrate temperature of 100°C. Titanium...
متن کاملTEM and STEM Studies on the Cross-sectional Morphologies of Dual-/Tri-layer Broadband SiO2 Antireflective Films
Dual-layer and tri-layer broadband antireflective (AR) films with excellent transmittance were successfully fabricated using base-/acid-catalyzed mixed sols and propylene oxide (PO) modified silica sols. The sols and films were characterized by scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR), transmission electron microscope (...
متن کاملResist-free antireflective nanostructured film fabricated by thermal-NIL
Resist-free antireflective (AR) nanostructured films are directly fabricated on polycarbonate (PC) film using thermal-nanoimprint lithography (T-NIL) and the moth-eye shape of AR nanostructure is elaborately optimized with different oxygen reactive ion etching conditions. Anodic aluminum oxide (AAO) templates are directly used as master molds of T-NIL for preparation of AR nanostructures on PC ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Applied optics
دوره 36 7 شماره
صفحات -
تاریخ انتشار 1997