The HIT/DLR dexterous hand: work in progress
نویسندگان
چکیده
This paper presents the current work progress of HIT/DLR Dexterous Hand. Based on the technology of DLR Hand II, HIT and DLR are jointly developing a smaller and easier manufactured robot hand. The prototype of one finger has been successfully built. The finger has three DOF and four joints, the last two joints are mechanically coupled by a rigid linkage. All the actuators are commercial brushless DC motors with integrated analog Hall sensors. DSP based control system is implemented in PCI bus architecture and the serial communication between the hand and DSP needs only 6 lines(4 lines power supply and 2 lines communication interface). The fingertip force can reach 10N.
منابع مشابه
Cartesian Impedance Control on Five-Finger Dexterous Robot Hand DLR-HIT II with Flexible Joint
This paper presents an impedance controller for five-finger dexterous robot hand DLR-HIT II, which is derived in Cartesian space. By considering flexibility in finger joints and strong mechanical couplings in differential gear-box, modeling and control of the robot hand are described in this paper. The model-based friction estimation and velocity observer are carried out with an extended Kalman...
متن کاملCartesian impedance control for dexterous manipulation
In this work, a cartesian impedance controller purposely designed for dexterous manipulation is described. Based on the main features of the DLR Hand II, concerning kinematic structure and sensory equipment of fingers, this control strategy allows to overcome the main problems encountered in fine manipulation, namely: effects of the friction (and unmodeled dynamics) on robot performances and oc...
متن کاملExperimental Analysis on Spatial and Cartesian impedance Control for the dexterous DLR/Hit II Hand
This paper presents an experimental study on impedance control in both Cartesian and object level with adaptive friction compensation for dexterous robot hand based on joint torque feedback. To adaptively decrease the effects of high friction caused by complex transmission systems and joint coupling, a friction observer is proposed based on the extended Kalman filter (EKF) in this paper. A Cart...
متن کاملSimple Controllers for Dexterous Hands
Unlike pick-and-place manipulations, ne motions strategies generate movements based on sensor information to overcome mechanical and sensory uncertainties. Performing assembly operations with a dexterous hand make high demands on the controller of the robot gripper. Pre-grasping operations are highly dependent on a good position/velocity control. The control strategies for position and velocity...
متن کاملSimulating an Extraterrestrial Environment for Robotic Space Exploration: the Meteron Supvis-justin Telerobotic Experiment and the Solex Proving Ground
This paper presents the on-going development for the Supvis-Justin experiment lead by DLR, together with ESA, planned for 2016. It is part of the ESA initiated Meteron telerobotics experiment suite aimed to study different forms of telerobotics solutions for space applications. Supvis-Justin studies the user interface design, and supervised autonomy aspects of telerobotics, as well as teleopera...
متن کامل