Non-Contact Method for Surface Roughness Measurement After Machining
نویسندگان
چکیده
184 Non-Contact Method for Surface Roughness Measurement After Machining J. Valíček, M. Držík, T. Hryniewicz, M. Harničárová, K. Rokosz, M. Kušnerová, K. Barčová, D. Bražina 1 Institute of Physics, Faculty of Mining and Geology, VŠB Technical University of Ostrava, 17. listopadu 15/2172, 708 33 Ostrava-Poruba, Czech Republic, corresponding author: [email protected] 2 Institute of Construction and Architecture, Slovak Academy of Sciences, Dúbravská cesta 9, 845 03 Bratislava, Slovakia 3 Division of Surface Electrochemistry and Technology, Koszalin University of Technology, Racławicka 15-17, PL 75-620 Koszalin, Poland 4 Nanotechnology Centre, VŠB Technical University of Ostrava, 17. listopadu 15/2172, 708 33 Ostrava-Poruba, Czech Republic 5 Department of Informatics and Computers, Faculty of Science, University of Ostrava, 30. dubna 22, 701 03 Ostrava, Czech Republic
منابع مشابه
In situ non-contact measurements of surface roughness
Surface roughness measurements are often required to validate a machining process. However, when using a 3D surface roughness measuring instruments it is usually necessary to remove the part from the machine tool between two operations, potentially introducing systematic errors. Furthermore, surface roughness measuring instruments are not suited for measuring heavy and large parts such as stamp...
متن کاملNon Contact Surface Finish Monitoring of Machined Surface using Vision System K.I .V.Vandana Assistant Professor Department of Mechanical Engineering PVP Siddhartha Institute of Technology Vjayawada
With ever increasing demand for the accurate engineering products, the control of surface texture has become more important. The measurement of surface roughness during machining process is critical for the automatic control of surface quality in computer-integrated manufacturing (CIM). Many methods of online measurement of surface roughness range from simple touch comparator to sophisticated o...
متن کاملPrediction of Machined surface Roughness A Review
Recent advances in manufacturing technology and industrial automation require efficient and quality oriented machining practices. Performance, cost effectiveness and reliability of the work piece depends on the quality of surface roughness and can be measured with contact (conventional) and non contact (advanced) methods. Various measurement techniques starting from stylus to machine vision are...
متن کاملExperimental Investigation of the Effect of Deionized Water on Surface Roughness of Near Dry Electro Discharge Machining of AISI D2 Steel
The electro discharge machining (EDM), one of the methods used in the machining industry and a non-traditional manufacturing method, the electro erosion process does not depend on the hardness of material and offers a way to process materials of very complex geometry with very fine and high precision by using cheap electrode materials, which make it a preferred method. In this study, effect of ...
متن کاملExperimental Investigation of the Effect of Deionized Water on Surface Roughness of Near Dry Electro Discharge Machining of AISI D2 Steel
The electro discharge machining (EDM), one of the methods used in the machining industry and a non-traditional manufacturing method, the electro erosion process does not depend on the hardness of material and offers a way to process materials of very complex geometry with very fine and high precision by using cheap electrode materials, which make it a preferred method. In this study, effect of ...
متن کامل