Theory for the rate of crack closure
نویسندگان
چکیده
The theory for the constant rate of crack closure was investigated. The aim of this theory is to explain why the rate of crack closure is constant during the wetting stage of healing. Assuming that a surface crack in a material is treated by compression or with solvent, its crack closes up at a constant rate and its shape is independent of time. This approach was based on the Gibbs energy of an atom near the boundary between healed and unhealed zones. The results are in satisfactory agreement with experimental data in the literature.
منابع مشابه
A New Comparative Method To Evaluate the Fracture Properties of Laminated Composite
In this paper a new method to determine the fracture properties and strain energy release rate for Carbon- Polyester composite has been introduced. Fracture characteristics such as critical stress intensity factor and critical strain energy release rate for mode I, mode II and mixed mode loading were determined using Arcan type specimen. 130 layers of carbon fiber polyester woven composite wit...
متن کاملEffect of Compressive Residual Stress on the Corner Crack Growth
In the present study, plasticity induced crack closure (PICC) concept and three dimensional (3D) finite element methods (FEM) are used to study the effect of compressive residual stress field on the fatigue crack growth from a hole. To investigate the effect of compressive residual stress on crack opening levels and crack shape evolution, Carlson’s experiments were simulated. Crack shape evolut...
متن کاملCold work simulation of hole expansion process and its effect on crack closure
Using cold working fastener holes is a simple life enhancement procedure that strengthens metallic components by retarding crack growth around a hole. In the present paper, the residual stress field that is induced by the hole expansion process is obtained based on different material models namely elastic perfect plastic, isotropic hardening and kinematic hardening using three-dimensional finit...
متن کاملA two dimensional Simulation of crack propagation using Adaptive Finite Element Analysis
Finite element method (FEM) is one of the most famous methods which has many applications in varies studies such as the study of crack propagation in engineering structures. However, unless extremely fine meshes are employed, problem arises in accurately modelling the singular stress field in the singular element area around the crack tip. In the present study, the crack growth simulation has b...
متن کاملCrack closure under high load-ratio conditions for Inconel-718 near threshold behavior
Fatigue-crack-growth (FCG) rate tests were conducted on compact specimens made of an Inconel-718 alloy to study the behavior over a wide range in load ratios (0.1 6 R 6 0.95) and a constant Kmax test condition. Previous research had indicated that high R (>0.7) and constant Kmax test conditions near threshold conditions were suspected to be crack-closure-free and that any differences were attri...
متن کامل