Undulatory delamination of thin polymer films on gold surfaces.

نویسندگان

  • Soonwoo Chah
  • Jaan Noolandi
  • Richard N Zare
چکیده

Using two-dimensional surface plasmon resonance measurements, we have observed the formation of traveling waves in the delamination of thin films of polydimethylsilane (PDMS) exposed to methanol. Films were spin-coated on a gold surface and the methanol was added to the top surface. The stress-induced instability caused by the swelling of the PDMS thin film when its edge is pinned to the gold surface leads to wrinkle formation and propagation at the interface. The periodic pattern is thought to be the result of an Asaro-Tiller-Grinfeld (ATG) instability.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Reversible Electrochemically Triggered Delamination Blistering of Hydrogel Films on Micropatterned Electrodes

adhesion, [ 14,15 ] wetting, [ 16,17 ] and optical characteristics [ 18 ] of surfaces, among other examples. In comparison to other buckling modes, delamination—wherein a supported elastic thin fi lm subject to a compressive mismatch strain undergoes debonding from the substrate and forms blister-like structures—has received relatively little attention with regards to applications in responsive...

متن کامل

Nonlinear Delamination Mechanics for Thin Films

Delamination of prestressed thin films on thick substrates is analysed accounting for plastic dissipation in either the substrate or film. Emphasis is on large scale yielding wherein the height of the plastic zone at the propagating interface crack tip is comparable to the film thickness. Such conditions are common for both metal and polymer thin films on elastic substrates or for ceramic coati...

متن کامل

Improved Adhesion of Gold Thin Films Evaporated on Polymer Resin: Applications for Sensing Surfaces and MEMS

We present and analyze a method to improve the morphology and mechanical properties of gold thin films for use in optical sensors or other settings where good adhesion of gold to a substrate is of importance and where controlled topography/roughness is key. To improve the adhesion of thermally evaporated gold thin films, we introduce a gold deposition step on SU-8 photoresist prior to UV exposu...

متن کامل

Improving Electrochromic Properties of WO3 Thin Film with Gold Nanoparticle Additive

In this research, WO3 and Au-WO3 thin films were prepared at different temperatures using the sol gel method. The effect of gold nanoparticles (GNPs) on the electrochromic properties of WO3 was also studied. 2.5 nm GNP was synthesized through sodium citrate reduction of gold chloride in an aqueous solution. These films were characterized by XRD, SEM, TEM, and spectrophotometer analyses. The fil...

متن کامل

Adhesion properties of polymer/silicon interfaces for biological micro-/nanoelectromechanical systems applications

Polymers are used in biological micro-nanoelectromechanical systems BioMEMS/NEMS applications due to their desirable mechanical properties, biocompatibility, and reduced cost relative to silicon microfabrication processes. Understanding the interfacial properties of the films that are used in BioMEMS/NEMS serves as a useful tool in obtaining higher device yield and greater mechanical reliabilit...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • The journal of physical chemistry. B

دوره 109 41  شماره 

صفحات  -

تاریخ انتشار 2005