Reflectance properties of pressed Algoflon F6: a replacement reflectance-standard material for Halon.
نویسندگان
چکیده
The standard ultraviolet through short-wave infrared (200-2500-nm) diffuse-reflectance material, Halon PTFE, type G-80, is no longer available. Therefore an equivalent diffuse-reflectance standard material must be found. Algoflon F6 is shown here to be an appropriate replacement through the presentation of measurements of various spectral-reflectance properties of Halon and Algoflon F6. The measurements include spectral hemispherical reflectance, spectral bidirectional reflectance factor (BRF), sample BRF repeatability, and sample lifetime.
منابع مشابه
Sintered Halon as a diffuse reflecting liner for light integration boxes
Sintered Halon G-80, a polytetrafluoroethylene (PTFE) resin available commercially in powdered form, is a superb diffuse reflector. Sintered Halon has > 96% absolute reflectance at wavelengths between 300 nm and 380 nm, and about 98% absolute reflectance above 380 rim. It is chemically inert, is mechanically strong, does not fluoresce, and the high reflectance is e&~y to maintain over time. We ...
متن کاملPhotometric Phase Functions of Common Geologic Minerals and Applications to Quantitative Analysis of Mineral Mixture Reflectance Spectra
Hapke's model for bidirectional reflectance is used to calculate the mass fractional abundance of components in intimately mixed, particulate surfaces from laboratory reflectance spectra. Application of this model, simplified by the assumptions that all surfaces scatter light with the same constant phase function and the opposition surge is negligible, to binary mineral mixtures are summarized ...
متن کاملNear Infrared 45°/0° Reflectance Factor of Pressed Polytetrafluoroethylene (PTFE) Powder
National Institute of Standards and Technology, Gaithersburg, MD 20899-0001 Pressed polytetrafluoroethylene (PTFE) powder is commonly used as a reflectance standard for bidirectional and hemispherical geometries. The wavelength dependence of the reflectance factor of PTFE is presented for the near-infrared spectral region (800 nm to 1600 nm) for the 458/08 geometry, as well as in the visible sp...
متن کاملA Wavelength Standard for the Near Infrared Based on the Reflectance Of Rare-Earth Oxides
This work describes the techniques used to prepare and analyze a reflectance wavelength standard composed of three rare-earth oxides. A mixture of dysprosium oxide (DY20.1), erbium oxide (Er203). and holmium oxide (Ho20) provides a pressed powder specimen exhibiting a near infrared reflectance spectrum characterized by many discrete absorption minima in the wavelength range 700 to 2000 urn. The...
متن کاملThe Effects of Illuminants and Standard Observers Combination on Relationship between Spectrophotometric Error and Colorimetric Inaccuracy
The colorimetric error depends on the spectrophotometric inaccuracy. In this paper, a new method is introduced for determining the relationship between spectrophotometric error and colorimetric inaccuracy. The error propagation in colorimetric parameter calculation is evaluated using a linear relation between variance of reflectance spectra and CIE tristimulus values. This linear formula ca...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Applied optics
دوره 36 13 شماره
صفحات -
تاریخ انتشار 1997