Saturation of electrical resistivity in metals at large temperatures.
نویسندگان
چکیده
We present a microscopic model for systems showing resistivity saturation. An essentially exact quantum Monte Carlo calculation demonstrates that the model describes saturation. We give a simple explanation for saturation, using charge conservation and considering the limit where thermally excited phonons have destroyed the periodicity. Crucial model features are phonons coupling to the hopping matrix elements and a unit cell with several atoms. We demonstrate the difference to a model of alkali-doped C60 with coupling to the level positions, for which there is no saturation.
منابع مشابه
Electrical Resistivity Measurement of the Molten Cordierite Glass Using Two-wire method
Electrical resistivity (ER) is a main parameter in the melting processes of glasses. However, its measurement is difficult at high temperatures. In this study the electrical resistivity of different cordierite glass samples in the molten state was measured in the temperature range of 1100˚C to 1550 ˚C using the two-wire method. It was attempted to decrease the electrical resistivity of the glas...
متن کاملSaturation of electrical resistivity of solid iron at Earth’s core conditions
We report on the temperature dependence of the electrical resistivity of solid iron at high pressure, up to and including conditions likely to be found at the centre of the Earth. We have extended some of the calculations of the resistivities of pure solid iron we recently performed at Earth's core conditions (Pozzo et al. in Earth Planet Sci Lett 393:159-164, 2014) to lower temperature. We sho...
متن کاملمطالعه تاثیر جایگزینی Ti به جای Mn روی خصوصیات ساختاری و الکتریکی منگنایت La0.8Sr0.2MnO3
In this study, the effect of Ti substitution on structural and electrical properties of La0.8Sr0.2Mn1-xTixO3 (0 ≤ x≤ 0.075) compounds have been investigated. The double exchange interaction mechanism weakens by substituting the nonmagnetic Ti4+ ions in Mn4+ and Mn3+ sites. The results show that with increasing the doping level, metal-insulator transition temperature shifts to lower temperatures...
متن کاملStructural, Electrical and Optical Properties of Molybdenum Oxide Thin Films Prepared by Post-annealing of Mo Thin Films
Molybdenum thin films with 50 and 150 nm thicknesses were deposited on silicon substrates, using DC magnetron sputtering system, then post-annealed at different temperatures (200, 325, 450, 575 and 700°C) with flow oxygen at 200 sccm (standard Cubic centimeter per minute). The crystallographic structure of the films was obtained by means of x-ray diffraction (XRD) analysis. An atomic force micr...
متن کاملStructural, Electrical and Optical Properties of Molybdenum Oxide Thin Films Prepared by Post-annealing of Mo Thin Films
Molybdenum thin films with 50 and 150 nm thicknesses were deposited on silicon substrates, using DC magnetron sputtering system, then post-annealed at different temperatures (200, 325, 450, 575 and 700°C) with flow oxygen at 200 sccm (standard Cubic centimeter per minute). The crystallographic structure of the films was obtained by means of x-ray diffraction (XRD) analysis. An atomic force micr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Physical review letters
دوره 87 26 شماره
صفحات -
تاریخ انتشار 2001