Microcontroller-Based Input Shaping for Vibration Control of Flexible Manipulator System
نویسندگان
چکیده
This project presents investigations into the applications and performance of embedded input shaper in command shaping techniques for vibration control of a flexible manipulator. A constrained planar single-link flexible manipulator is considered and the dynamic model of the system is derived using the assume mode method. An unshaped bang-bang torque input is used to determine the characteristic parameters of the system for design and evaluation of the input shaping control techniques. In order to investigate real-time implementation of the controllers, the embedded input shaping is programmed in PIC microchip and tested to the flexible manipulator model in Matlab. The investigation results of the response of the manipulator to the shaped inputs are presented in time and frequency domains. The performance of the controllers in real-time are investigated in terms of the level of vibration reduction and time response specifications.
منابع مشابه
Hybrid Concepts of the Control and Anti-Control of Flexible Joint Manipulator
This paper presents a Gaussian radial basis function neural network based on sliding mode control for trajectory tracking and vibration control of a flexible joint manipulator. To study the effectiveness of the controllers, designed controller is developed for tip angular position control of a flexible joint manipulator. The adaptation laws of designed controller are obtained based on sliding m...
متن کاملControl of Flexible Link Robot using a Closed Loop Input-Shaping Approach
This paper is has addressed the Single Flexible Link Robot. The dynamical model is derived using Euler-Lagrange equation and then a proper controller is designed to suppress a vibration based-on Input-Shaping (IS) method. But, IS control method is an open loop strategy. Due to the weakness of open loop control systems, a closed loop IS control system is proposed. The achieved closed loop c...
متن کاملQFT Control of a Two-Link Rigid-Flexible Manipulator
This paper evaluates a new and simple controller design method based on QFT (quantitative feedback theory) for a two-link manipulator whose first link is rigid and the second is flexible. A piezoelectric patch is attached to the surface of the flexible link for vibration suppression of it. This system is modeled as a nonlinear multi-input multi-output (MIMO) control systems whose inputs are two...
متن کاملNon-collocated Fuzzy Logic and Input Shaping Control Strategy for Elastic Joint Manipulator: Vibration Suppression and Time Response Analysis
Conventional model-based control strategies are very complex and difficult to synthesize due to high complexity of the dynamics of robots manipulator considering joint elasticity. This paper presents investigations into the development of hybrid control schemes for trajectory tracking and vibration control of a flexible joint manipulator. To study the effectiveness of the controllers, initially...
متن کاملHybrid Learning Control with Input Shaping for Input Tracking and Vibration Suppression of a Flexible Manipulator
The objective of the work reported in this paper is to investigate the development of hybrid iterative learning control with input shaping for input tracking and end-point vibration suppression of a flexible manipulator. The dynamic model of the system is derived using the finite element method. Initially, a collocated proportional-derivative (PD) controller utilizing hub-angle and hub-velocity...
متن کامل