Morphodynamics of submarine channel inception revealed by new experimental approach
نویسندگان
چکیده
Submarine channels are ubiquitous on the seafloor and their inception and evolution is a result of dynamic interaction between turbidity currents and the evolving seafloor. However, the morphodynamic links between channel inception and flow dynamics have not yet been monitored in experiments and only in one instance on the modern seafloor. Previous experimental flows did not show channel inception, because flow conditions were not appropriately scaled to sustain suspended sediment transport. Here we introduce and apply new scaling constraints for similarity between natural and experimental turbidity currents. The scaled currents initiate a leveed channel from an initially featureless slope. Channelization commences with deposition of levees in some slope segments and erosion of a conduit in other segments. Channel relief and flow confinement increase progressively during subsequent flows. This morphodynamic evolution determines the architecture of submarine channel deposits in the stratigraphic record and efficiency of sediment bypass to the basin floor.
منابع مشابه
Quantifying the morphology and growth of levees in aggrading submarine channels
[1] Levees are the primary elements of self-formed submarine channels, yet little is know about their morphodynamics. We present field observations of static levee morphology and stratigraphy in addition to laboratory experiments that link levee morphodynamics to turbidity current flow properties. These observations are used to motivate a levee growth model. Using a three-dimensional seismic vo...
متن کاملA new approach for fabrication of bulk MMCs using Accumulative Channel-die Compression Bonding (ACCB)
A new severe plastic deformation (SPD) based technique entitled Accumulative channel-die compression bonding (ACCB) is proposed for the fabrication of high strength multi-layered Al/Cu composites for the first time. In order to primarily demonstrate the capabilities of ACCB in the fabrication of metal matrix composites (MMCs), AA 1050 and pure Cu strips were processed. The primary Al/Cu sandwic...
متن کاملMargin Morphodynamics: Debris Flows, Turbidity Currents and Experimental Margin Stratigraphy
Three approaches have been taken to the study of submarine debris flows. 1) Measurements laterally constrained debris flow dynamics and pore pressure variation have been performed in the “Fish Tank” facility. 2) The dynamics of unconfined debris flows have been studied using the “Main Channel.” 3) A numerical model of muddy debris flows is being extended to a) sandy debris flows and b) the rewo...
متن کاملExperimental Investigation of the Effect of Splitter Plate Angle on the Under-Scouring of Submarine Pipeline Due to Steady Current and Clear Water Condition
Submarine pipelines are appropriate method for transmission of oil and gas from sea bed. Free spans may occur due to the natural uneven seabed or by under-scouring. Vortex Induced Vibration (VIV) can happen in such free spans at high Reynolds number. Resonance occurs if the frequency of vortex shedding is close to the pipeline’s natural frequency leading to its fatigue that can break the pipeli...
متن کاملTheoretical and Experimental Collapse Analysis of Ring Stiffened Shells Using Finite Element Software Packages and Application of Results to a Submarine Pressure Hull
It is empirically established that, due to a number of factors involved, a classical (linear) analysis of buckling pressure is impossible. Nonlinear theories of buckling are, therefore, required that involve effective factors such as imperfections and welding effects. In this study, models are developed which are as close to allowable standard deviations as possible. In the next stage, their bu...
متن کامل