Resistance of U-233 in Spent Fuel
نویسندگان
چکیده
The factors influencing the level of U-232 contamination in U-233 are examined for heavy-water-moderated, light-water-moderated and liquid-metal cooled fast breeder reactors fueled with natural or low-enriched uranium and containing thorium mixed with the uranium or in separate target channels. U-232 decays with a 69-year half-life through 1.9-year half-life Th-228 to Tl-208, which emits a 2.6 MeV gamma ray upon decay. We find that pressurized light-water-reactors fueled with LEU-thorium fuel at high burnup (70 MWd/kg) produce U-233 with U-232 contamination levels of about 0.4 percent. At this contamination level, a 5 kg sphere of U-233 would produce a gammaray dose rate of 13 and 38 rem/hr at 1 meter one and ten years after chemical purification respectively. The associated plutonium contains 7.5 percent of the undesirable heat-generating 88-year half-life isotope Pu-238. However, just as it is possible to produce weapon-grade plutonium in low-burnup fuel, it is also practical to use heavy-water reactors to produce U-233 containing only a few ppm of U-232 if the thorium is segregated in “target” channels and discharged a few times more frequently than the natural-uranium “driver” fuel. The dose rate from a 5-kg solid sphere of U-233 containing 5 ppm U-232 could be reduced by a further factor of 30, to about 2 mrem/hr, with a close-fitting lead sphere weighing about 100 kg. Thus the proliferation resistance of thorium fuel cycles depends very much upon how they are implemented.
منابع مشابه
Self-protection Analysis of Denatured Thorium-plutonium Fuel
With growing demands for commercial nuclear power, there is also a growing need for better energy efficiency from nuclear power reactors. In order to reach a high burnup up to 100 MWd/kg, previous research has examined the use of thorium-plutonium mixedoxide fuel as a potential candidate for this high-burnup goal. Though the neutronics studies have looked upon this fuel type favorably, the purp...
متن کاملThorium Blended and Regular Mox Burn-up Studies for Fast Reactor Fuel Cycle Safeguards
Fast reactor fuel cycle (FRFC) is regaining importance because of its vital role in the long term development of nuclear power. The safety issues associated with the fast reactors are now well understood and newer designs can address those from the lessons learned in the past. The same cannot be ascertained about their safeguards issues. Primary reason being the presence of special nuclear mate...
متن کاملSafety Analysis of Spent Fuel Transportation Cask of Bushehr Nuclear Power Plant through the Passing of Fire Tunnel with ANSYS®10.0
The spent fuel assemblies (FAs) of Bushehr Nuclear Power Plant are planed to be transported by TK-13 casks. Each spent fuel transportation cask holds 12 spent FAs and has a thick steel container to provide shielding. The calculations have been performed for FAs with burn ups of 60 MWd/kg and a 3-years cooling period. The ANSYS®10.0 general finite element analysis package was se...
متن کاملModal Analysis of Spent Fuel Cask for WWER-1000 Reactors
The Spent Fuel Assemblies (SFAs) of WWER-1000 reactors are planned to be transported by special containers which are supposed to be designed in a manner to stand against vibrations and impacts in order to protect the spent fuel from any possible damage. The vibration opposition of these containers shall be far beyond the critical resonance, because the resonances about the natural frequency of ...
متن کاملInvestigation of the required thickness of thorium spent fuel lead transport cask depending on different fuel burnups and cooling times
Thorium fuels have attracted researcher’s attention due to the reduction of uranium deposits in the world, more abundances than uranium, and the ability to be breeding in thermal and fast reactors. This study aimed to investigate the radiation safety and the amount of necessary shielding for the transportation of spent thorium fuel in the Tehran Research Reactor. The ORIGEN and MCNPX computatio...
متن کامل