Investigation of effect of leg support elevation timing on the horizontal force acting on the buttocks in a reclining wheelchair
نویسندگان
چکیده
[Purpose] The purpose of this study was to investigate the effect of the timing of leg support elevation on the horizontal force acting on the buttocks in a reclining wheelchair. [Subjects and Methods] The participants were 17 healthy men. Two experimental conditions were tested: the leg-down and leg-up conditions. The back support was reclined at increasing angles, from the initial upright position (IUP), proceeding to the fully reclined position (FRP), and returned to the upright position (RUP). The posterior inclination phase was from IUP to FRP, and the returning inclination phase was from FRP to RUP. [Results] The horizontal force under the leg-up condition was significantly higher than that under the leg-down condition in all positions of back support. [Conclusion] The leg supports should be positioned downward before reclining the back support of a wheelchair.
منابع مشابه
Influence of Leg Support Elevation on Horizontal Force Acting on the Buttocks in a Reclining Wheelchair in Different Rotational Axis Positions of the Back Support
Purpose: The purpose of this study was to investigate how the influences of leg support elevation on the horizontal force acting on the buttocks in a reclining wheelchair changes in various rotational axis positions of the back support. Materials and methods: The participants were 13 healthy men. The horizontal force was measured using a force plate on the experimental chair. Four experimental ...
متن کاملEffect of Rotational Axis Position of Wheelchair Back Support on Shear Force when Reclining
[Purpose] The purpose of this study was to investigate the influence of the rotational axis position of a reclining wheelchair's back support on fluctuations in the shear force applied to the buttocks while the back support is reclined. [Subjects] The subjects were 12 healthy adult men. [Methods] The shear force applied to the buttocks was measured using a force plate. This study used two diffe...
متن کاملInvestigation of geometric parameters of seawalls on the amount of earth subsidence and its horizontal displacement by FLAC 3D software
Seawalls are built for Protecting of beaches against waves and preventing the progression of water to the beach. For a proper understanding about these constructions, a suiTable information about applied loads on these constructions should be existed. One of the important load that applied on these constructions is sea wave. Others loads are included: weight force of the walls, weight force of ...
متن کاملEvaluation of the effect of different sitting assistive devices in reclining wheelchair on interface pressure
BACKGROUND Reclining wheelchair users often add one or more sitting assistive devices to their wheelchairs, but the effect of these additional sitting assistive devices on the risk of pressure ulcers has rarely been investigated. This study examined the four modes of reclining wheelchair without and with different sitting assistive devices, namely the back reclined mode, the lumbar support with...
متن کاملNumerical Modeling of Launching Offshore Jackets from Transportation Barge & the Significance of Water Entry Forces on Horizontal Jacket Members
Development of a numerical model which describes launching of offshore jackets from barge is presented in this paper. In this model, in addition to capabilities of commercial softwares, water entry forces on jacket members and an implicit Newmark solution technique are included. The results are in general agreement with other numerical software’s available (SACS). Fluid forces acting on jacket ...
متن کامل