Maximum voluntary ventilation prediction from the velocity-volume loop.
نویسندگان
چکیده
منابع مشابه
An Experimental Investigation and Prediction of Asphaltene Deposition during Laminar Flow in the Pipes Using a Heat Transfer Approach
In this study, asphaltene deposition from crude oil has experimentally and theoretically been studied using a test loop and an accurate temperature monitoring during a laminar flow. The effects of oil velocity and surface temperature on the thickness of asphaltene deposition were investigated. The results show that asphaltene deposition thickness increases by increasing surface temperature. As ...
متن کاملPrediction criteria for successful weaning from respiratory support: statistical and connectionist analyses.
OBJECTIVE To develop predictive criteria for successful weaning of patients from mechanical assistance to ventilation, based on simple clinical tests using discriminant analyses and neural network systems. DESIGN Retrospective development of predictive criteria and subsequent prospective testing of the same predictive criteria. SETTING Medical ICU of a 300-bed teaching Veterans Administrati...
متن کاملMixing Studies in Loop Bioreactors for Production of Biomass from Natural Gas
The mixing behavior of the gas-liquid phase in three loop bioreactors was investigated. A gas-induced External Airlift Loop Bioreactor (EALB), a forced-liquid Vertical Tubular Loop Bioreactor (VTLB) and a forced-liquid Horizontal Tubular Loop Bioreactor (HTLB) were used for mixing studies as well as biomass production from natural gas. The effect of design parameters, riser to downcomer cro...
متن کاملDyspnea in a patient years after severe poliomyelitis. The role of cardiopulmonary exercise testing.
Dyspnea after polio can occur for a variety of reasons, including neuromuscular disease and upper airway abnormalities resulting from prolonged intubation, including tracheal stenosis, tracheomalacia, and vocal cord paralysis. Routine studies such as spirometry and maximum voluntary ventilation (MVV) measurements can give similar results in these conditions. We present a 50-year-old woman who a...
متن کاملبررسی آلودگی هوای ناشی از فرآیند برش پلاسما و طراحی سامانه تهویه صنعتی در تعمیرگاه مرکزی شرکت فولاد مبارکه
Background & Objectives : Cutting leads to production of different hazardous agents such as fumes, particles, gases and vapors. In various studies, the effects of fumes, gases, and vapors on workers and environment have been proved. Meanwhile, cutting alloying plates with plasma cutting machine due to containing various alloy materials produces a lot of air pollution. Therefore, using the venti...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Diseases of the chest
دوره 43 شماره
صفحات -
تاریخ انتشار 1963