Application practice of BOF Slag tailings in steelmaking process
نویسندگان
چکیده
The present paper introduces the steel production and BOF slag processing techniques in Steelmaking Sector of Bayuquan Iron and Steel Subsidiary, Ansteel. The technology of slag tailings utilization has been developed under the consideration of the properties of slag tailing and the characteristics of slag forming in BOF steelmaking operation practice. The processing of the BOF slag includes hot disintegration,a magnetic separation and transports of the separated beneficiate block steel and slag tailing. The results of BOF production practice show that the application of slag tailings as slag forming materials is benefitial to the acceleration of slag forming, the dephosphorization, as well as natural resources and cost saving. Therefore, its utilization as slag forming materials in BOF operation practice is a good way for the cycling BOF slag, and can reduce the pressure to the environment by BOF production.
منابع مشابه
Processing and Reusing Technologies for Steelmaking Slag
About 40 million tons of steel slag a year, which is the by-product of iron and steel manufacture, is generated in Japan and the almost all the slag is reused for the materials, e.g. cement raw material, road base course material and civil engineering material, by effectively utilizing its characteristics such as chemical components and mechanical properties. Most of its purposes of uses are to...
متن کاملBasic oxygen furnace based steelmaking processes and cleanliness control at Baosteel
Optical microscopy, total oxygen measurements and slime tests have been conducted to quantify the size distribution and amount of inclusions at various processing steps during basic oxygen furnace (BOF) based steel production at Baosteel. The effects on steel cleanliness of specific operational improvements during steel refining and continuous casting have been investigated. Such improvements t...
متن کاملInvestigations of Calcium Aluminate Slag Penetration to MgO Monolithic Refractories in Steelmaking Process
In this study, slag penetration into a magnesia refractory monolithic was investigated by the crucible test method. A synthetic calcium aluminate slag system has been used to study commercial magnesia mix refractory for 1, 2, 3, 4, 5 and 6 hours at 1450°C and 1600°C. It has been shown that the penetration rate is controlled by a diffusion mechanism at 1450°C. In this case, capillaries are the ...
متن کاملThe Effect of Slag Modeling to Improve Steelmaking Processes
This paper attempts to illustrate the benefits of using slag models based on the thermodynamics of steelmaking reactions and the multi-dimensional modeling of phase equilibria. The use of mass balance calculations and the application of these personal computer-based slag models to the refinement of standard operating procedures can simultaneously result in shorter process times, more predictabl...
متن کاملThe effective parameters on thermal recovery and reduction of iron oxides in EAF slag
Steelmaking slag of Mobarakeh Steel Company (MSC) has a high iron content which makes it unsuitable for conventional slag recovery; as in cement industries. On the other hand, EAF slag in this company is almost free of zinc because of using more than 90 percent DRI in the charge. Therefore, removal or recovery of iron from the slag can be a suitable solution to slag recovery in this company. In...
متن کامل