Peel bond strength of resilient liner modified by the addition of antimicrobial agents to denture base acrylic resin
نویسندگان
چکیده
UNLABELLED In order to prolong the clinical longevity of resilient denture relining materials and reduce plaque accumulation, incorporation of antimicrobial agents into these materials has been proposed. However, this addition may affect their properties. OBJECTIVE This study evaluated the effect of the addition of antimicrobial agents into one soft liner (Soft Confort, Dencril) on its peel bond strength to one denture base (QC 20, Dentsply). MATERIAL AND METHODS Acrylic specimens (n=9) were made (75x10x3 mm) and stored in distilled water at 37 ºC for 48 h. The drug powder concentrations (nystatin 500,000 U--G2; nystatin 1,000,000 U--G3; miconazole 125 mg--G4; miconazole 250 mg--G5; ketoconazole 100 mg - G6; ketoconazole 200 mg--G7; chlorhexidine diacetate 5%--G8; and 10% chlorhexidine diacetate--G9) were blended with the soft liner powder before the addition of the soft liner liquid. A group (G1) without any drug incorporation was used as control. Specimens (n=9) (75x10x6 mm) were plasticized according to the manufacturers' instructions and stored in distilled water at 37 ºC for 24 h. Relined specimens were then submitted to a 180-degree peel test at a crosshead speed of 10 mm/min. Data (MPa) were analyzed by analysis of variance (α=0.05) and the failure modes were visually classified. RESULTS No significant difference was found among experimental groups (p=0.148). Cohesive failure located within the resilient material was predominantly observed in all tested groups. CONCLUSIONS Peel bond strength between the denture base and the modified soft liner was not affected by the addition of antimicrobial agents.
منابع مشابه
The influence of silicone remover on the tensile bond strength of resilient denture liner to an acrylic denture base resin
Purpose: The purpose of this study was to determine the influence of silicone remover on tensile bond strength of eight silicone-resilient denture liners to a denture base resin. Durability of bond strength of resilient denture liner to denture base resin was also examined by thermal cycling test. Materials and Methods: Eight commercial silicone resilient denture liners were used. The specimens...
متن کاملThe effect of denture base surface pretreatments on bond strengths of two long term resilient liners
PURPOSE Purpose of this study was to evaluate effect of two surface treatments, sandblasting and monomer treatment, on tensile bond strength between two long term resilient liners and poly (methyl methacrylate) denture base resin. MATERIALS AND METHODS Two resilient liners Super-Soft and Molloplast-B were selected.Sixty acrylic resin (Trevalon) specimens with cross sectional area of 10×10 mm ...
متن کاملPeel strength of denture liner to PMMA and polyamide: laser versus air-abrasion
PURPOSE This study investigated the effect of laser parameters and air-abrasion on the peel strength of silicon-based soft denture liner to different denture resins. MATERIALS AND METHODS Specimens (N=180) were prepared out of three different denture base resins (Rodex, cross-linked denture base acrylic resin; Paladent, heat-cured acrylic resin; Deflex, Polyamide resin) (75 mm × 25 mm × 3 mm)...
متن کاملA comparative evaluation of soft denture liners
Statement of problems: Two potential problems commonly identified with a denture base incorporating a resilient liner are a failure of the bond between the acrylic resin and resilient liner material and colonization of Candida albicans over time. Aims: This in vitro experimental study evaluated the shear and compressive bond strength as well as colonization of Candida albicans of commonly avail...
متن کاملEffect of Beverages on the Hardness and Tensile Bond Strength of Temporary Acrylic Soft Liners to Acrylic Resin Denture Base
STATEMENT OF PROBLEM Two potential problems commonly identified with a denture base incorporating a resilient liner are failure of the bond between acrylic resin and soft liner material, and loss of resiliency of the soft liner over time. Since patients may drink different beverages, it is important to evaluate their effects on physical properties of soft lining materials. PURPOSE The objecti...
متن کامل