Transistor Switching with a Reactive Load
نویسنده
چکیده
Electronic circuits inevitably involve reactive elements, in some cases intentionally but always at least as significant parasitic elements. Although their influence on circuit performance may be subordinate for a particular circuit reactive elements introduce an ultimate limitation on frequency response and switching speed. Energy storage in a reactive element is a reflection of the prior activity of that element and so introduces consideration of past history into the analysis of a circuit.
منابع مشابه
Investigation and simulation of the effect of Substrate Doping on the Switching Delay of 22nm Double-Insulating UTBB SOI MOSFET
In this paper, for the first time, the effect of the substrate doping of 22nm double-insulating UTBB silicon-on-insulator device on the switching performance and turn-on delay of the transistor is investigated. In UTBB devices, the substrate voltage is varied from positive to zero then negative voltages to trade-off transistor speed against the leakage current. Various circuit design procedures...
متن کاملSwitching Performance of Nanotube Core-Shell Heterojunction Electrically Doped Junctionless Tunnel Field Effect Transistor
Abstract: In this paper, a novel tunnel field effect transistor (TFET) is introduced, thatdue to its superior gate controllability, can be considered as a promising candidate forthe conventional TFET. The proposed electrically doped heterojunction TFET(EDHJTFET) has a 3D core-shell nanotube structure with external and internal gatessurrounding the channel that employs el...
متن کاملA New Zero-Voltage-Switching Push-Pull Converter
A soft switching three-transistor push-pull(TTPP)converter is proposed in this paper. The 3rd transistor is inserted in the primary side of a traditional push-pull converter. Two primitive transistors can achieve zero-voltage-switching (ZVS) easily under a wide load range, the 3rd transistor can also realize zero-voltage-switching assisted by leakage inductance. The rated voltage of the 3rd tra...
متن کاملTransmission-Line Load-Network Topology for Class-E Power Amplifiers
Class-E amplifiers are a type of switching amplifier offering very high efficiency approaching 100% . In this paper, a topology and design methodology, which could be used for a transmission-line implementation of a class-E power amplifier, is presented. A simple transmission-line class-E load network is proposed that offers combined transformation of the load resistance down to a suitable leve...
متن کاملSwitched-Capacitor Dynamic Threshold PMOS (SC-DTPMOS) Transistor for High Speed Sub-threshold Applications
This work studies the effects of dynamic threshold design techniques on the speed and power of digital circuits. A new dynamic threshold transistor structure has been proposed to improve performances of digital circuits. The proposed switched-capacitor dynamic threshold PMOS (SC-DTPMOS) scheme employs a capacitor along with an NMOS switch in order to effectively reduce the threshold voltage of ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2002